Page 1 of 1

Yet another lil issue!

Posted: Sun Apr 04, 2010 7:50 pm
by M54 SINGH
Basically even after my service my car was sounding abit tooo noisy for its own good.. ive had a local garage look at it n they rekon its the oil pump... wha do u guys think?

thanx in advance!

Re: Yet another lil issue!

Posted: Sun Apr 04, 2010 11:35 pm
by alexperkins
What kinda noisy is it mate...grinding rattling crunching?

Re: Yet another lil issue!

Posted: Mon Apr 05, 2010 10:47 am
by M54 SINGH
its a lil bit tappety and sounds abit like a diesel on cold start lol
i no the tappets on these are hydrolic ones... so gna get them measured... bt wt bout the diesel sounds :?

Re: Yet another lil issue!

Posted: Tue Apr 06, 2010 6:39 pm
by polo_mad
your in the same boat mate! Ever since i bought my polo, it has sounded like a diesel, still no idea why though.. can anyone put some light on this subject?

Re: Yet another lil issue!

Posted: Tue Apr 06, 2010 7:16 pm
by alexperkins
what engines have you both got?

Re: Yet another lil issue!

Posted: Tue Apr 06, 2010 7:32 pm
by red6n2
lol i also suffer from this and ive got the 60bhp 1.4 SE, but mine has done over 130,000 miles ! :|

Re: Yet another lil issue!

Posted: Tue Apr 06, 2010 8:04 pm
by RS_GT
i have this problem too, it sounds a lot like a diesel and a i get a faint tapping noise too

i have a 1.4 8v AUD engine

Re: Yet another lil issue!

Posted: Wed Apr 07, 2010 11:24 am
by M54 SINGH
ive got the AHW (75 bhp valver)...... Ma Local Garage rekons that its the oil pump on its way out....

Re: Yet another lil issue!

Posted: Thu Apr 08, 2010 11:38 am
by polo_mad
yeah mine's the 75bhp 1.4 16v.

Re: Yet another lil issue!

Posted: Thu Apr 08, 2010 12:41 pm
by alexperkins
the 1.4 16V 75bhp models are renowned for being loud. Its due to the tappets wearing. A bottle of wynns hydraulic tappet lubricant in with the oil will help quieten the engine down, and sometimes a slightly thicker engine oil such as a 15w40 can help quieten them down.

Theres nothing wrong as such, its just wear and tear. With good maintenance, they will continue for many thousands of miles.

A can of engine oil flush, new oil and filter and a bottle of tappet lubricant in with the new oil can work wonders - try it ;)

Re: Yet another lil issue!

Posted: Thu Apr 08, 2010 12:48 pm
by M54 SINGH
i have already done the engine flush and new oil filter etc (service done about 1000 miles ago)... i will change the oil within 5000 miles! and also chuck in some hydraulic tappet lubricats....
but yehhh thanx for that m8! :wink: