Page 1 of 1
will this work?
Posted: Sun May 09, 2010 10:42 pm
by I-Roo
wanting to upgrade form CL to Remote CL and was wondering which one to go for with Rclick :/ was wondering if this would work the key shape diagram looks different shape from the 6n2 key but then then in the image it looks the same :/
Roo
p.s. if anyone's bought the RCL kit from rclick could you tell me which one you bought?

Re: will this work?
Posted: Sun May 09, 2010 11:04 pm
by alexperkins
key HU66 is the one you need for the MKV polo
Re: will this work?
Posted: Sun May 09, 2010 11:32 pm
by I-Roo
would you recommend this kit then?
http://www.rclick.co.uk/product_info.ph ... cts_id=743
Is there anything against using these kits?
Re: will this work?
Posted: Mon May 10, 2010 7:43 am
by alexperkins
looks good mate
Nope they ar every good kits.
Re: will this work?
Posted: Mon May 10, 2010 12:19 pm
by Josh_6n2_Polo
I want to order mine! But HU66 doesn't match my key?
Cheers
Re: will this work?
Posted: Mon May 10, 2010 12:36 pm
by I-Roo
orderd the kit lastnight soo jsut need it to come

found a guide on another part of the forum for installing one so should be easy...
Well ive looked at my key for my 6N2 and the key is the same :/ i dont know if the key shape for GTI or so on is different but mines only a 1.4 SE

Re: will this work?
Posted: Mon May 10, 2010 4:19 pm
by Josh_6n2_Polo
Ok cool mate can you link me to the guide?
Cheers
Re: will this work?
Posted: Mon May 10, 2010 5:43 pm
by red6n2
Josh_6n2_Polo wrote:Ok cool mate can you link me to the guide?
ever thought about using the "search" button ?
Re: will this work?
Posted: Mon May 10, 2010 6:14 pm
by I-Roo
search "rclick 6n2"
was jsut wondering how do i go about getting the key cut? do i go to a hardware store or that Thomson place as normal or? do i need to do something special?
thanks for the help so far guys
Re: will this work?
Posted: Mon May 10, 2010 6:24 pm
by alexperkins
Most Audi garages can cut them.
Re: will this work?
Posted: Mon May 10, 2010 11:07 pm
by I-Roo
ugg well i have no idea were i can find a audi garage near me there is a VW garage in north allerton which is close to me you reckon they will do it?
Re: will this work?
Posted: Mon May 10, 2010 11:13 pm
by alexperkins
Try calling them up. It depends if they have the cutting tool to do it.
Teesside Audi
Phone: 01642 603444
Fax: 01642 607888
Email:
[email protected]
Website:
www.teesside.audi.co.uk
Address:
Brooklime Avenue
Stockton-on-Tees
Cleveland
TS18 3UR
Thats your nearest
Re: will this work?
Posted: Tue May 11, 2010 7:55 pm
by I-Roo
i was in teeside today and i saw them i know where they are and i go to a cash and carry just next to it soo its all cool

ill contact them about cutting on Thursday

ill be going there again then
