RClick Help please
Posted: Wed May 26, 2010 11:59 pm
ok so i had a technician over trying to fit my alarm and basically we got confused
we got as far as wiring it up to the ignition and giving it a power supply, then we tried arming it then disarming it but when we tried grounding the blue wire which connects to the door, the alarm was going off, so we couldn't connect the door wire without the alarm activating and going off ( siren was disconnected, but indicators were blinking).
I was checking the wiring diagram from the rclick site, and the unit i have has a purple wire which is not on the diagram
and for the interior light it says there should be a red/ black wire which i do not have
i was wondering if anyone has a proper wiring diagram or any instructions on which wires to connect where
the kit i have is the AL60w
any help would be appreciated
thanks guys
we got as far as wiring it up to the ignition and giving it a power supply, then we tried arming it then disarming it but when we tried grounding the blue wire which connects to the door, the alarm was going off, so we couldn't connect the door wire without the alarm activating and going off ( siren was disconnected, but indicators were blinking).
I was checking the wiring diagram from the rclick site, and the unit i have has a purple wire which is not on the diagram
and for the interior light it says there should be a red/ black wire which i do not have
i was wondering if anyone has a proper wiring diagram or any instructions on which wires to connect where
the kit i have is the AL60w
any help would be appreciated
thanks guys