Page 1 of 1

Bulk head and wires

Posted: Fri Aug 27, 2010 12:10 pm
by vdub10
Hiya

Just been wiring sub and amp in my polo all audio wires going great just the 1 power cable from amp to battery. cant find were to put it through bulk head.

any ideas or past experience welcome

thanks

tom

Re: Bulk head and wires

Posted: Mon Aug 30, 2010 10:44 pm
by l0rne
for the wiring? ... hide cable running along below the door behind a seal then you will have to take glove box out (takes 2 mins) then feed the wire up where you can see it behind the glove box area, then drill a hole in the metal(it is possile ive done it myself) to thread through to go through a rubber seal (which you only need to knock one corner out with a small screw driver) to link up to the battery.