Page 1 of 1
Polo 6n 16v bits
Posted: Wed Nov 03, 2010 11:36 pm
by racerjonzo
got a 6n 16v stripping for parts possibly...
bought with knackered engine, replaced engine and was in the middle of wiring 6n2 dash in, then had problem with injectors getting no power, and now the cold nights have possibly just called it quits on the polo now, so wondering if anyone is needing any parts etc
most 6n 16v parts still here
also 6n2 rear lights
one piece black angel eyes
lowering springs (not been fitted)
addition grills with fogs (no loom)
6n2 dash, centre part and handbrake etc
started to smooth boot, basicly just welded a plate over recess needs smoothing to finish
original dash also in black 16v version
seats and door cards still here aswell
carpet and pillars aswell if anyones interested or wants to experiment
cheers
texts on 07825020315 John
Re: Polo 6n 16v bits
Posted: Thu Nov 04, 2010 6:20 pm
by Bradley
Are the 6N2 rear lights ready to fit to a 6N or have they not yet been modified.Just asking as a friend wanted some for his 6N.
Many thanks
Re: Polo 6n 16v bits
Posted: Thu Nov 04, 2010 7:38 pm
by eddymcbrambram
texted
Re: Polo 6n 16v bits
Posted: Fri Nov 05, 2010 1:23 am
by racerjonzo
not been modded yet as the fitment didnt bother me
text replied
Lights Sold
Re: Polo 6n 16v bits
Posted: Fri Nov 05, 2010 7:41 pm
by CharlesK
Angel eyes if you still ahve them (: my brother may be interested.
You say you sold the 6n2 rears?
Re: Polo 6n 16v bits
Posted: Sat Nov 06, 2010 1:16 am
by racerjonzo
hey charles, yea 6n2 rears are now gone with front clear indies aswell(forgot to list, but now gone anyway)
angels still here, had someone interested but backed out at last minute, so ur in luck
PM me your best offer
Re: Polo 6n 16v bits
Posted: Sat Dec 25, 2010 1:25 pm
by lestansey
hi do you have the alloy wheels (BBS RXII's) still availiable and are they in good condition, could you put some pictures up or if not email them to me at:
are they 15 inch?
are they 4 stud fitment 4x100?
whats the offset of the wheels?
[email protected]
cheers
Re: Polo 6n 16v bits
Posted: Sat Dec 25, 2010 5:47 pm
by racerjonzo
yep all correct
15 inches indeed and 4 stud by 100
im not 100% but think the offset is ET45
i was ready to refurb wheels so two of them are semi-prepped
all lips had corrosion when i bought them so will need refurb hence i was going to do these and then sell on
NO tyres are with them though if you offer right amount and pay for tyres i can have them fitted and balanced for arrival
this all depends on if you want me to refurb them then tyres, or if you just want the wheels to refurb yourself
cheers
Re: Polo 6n 16v bits
Posted: Sun Dec 26, 2010 10:07 pm
by 1der
have you got central locking pump and how much woulde you be after for it?
Re: Polo 6n 16v bits
Posted: Mon Dec 27, 2010 8:52 pm
by racerjonzo
sorry pins for connection tab on pump were corroded, so useless and binned it
Re: Polo 6n 16v bits
Posted: Tue Dec 28, 2010 10:58 pm
by slflowfoon
passenger mirror delivered?
Re: Polo 6n 16v bits
Posted: Tue Apr 05, 2011 12:31 am
by RiPolo6n
How low are the springs & how much?
Re: Polo 6n 16v bits
Posted: Tue Apr 05, 2011 9:22 pm
by P0*L0W*
Hi, do u still have the throttle body im lukin for 1 with this code 036133064E, also what colour is ur polo cud b after a bonnet if u still have that. Thanks
Re: Polo 6n 16v bits
Posted: Wed Apr 06, 2011 3:56 am
by racerjonzo
car is now sold, but i do have some things floating around the house that i have gathered over the years, so if its accesories or trim pieces i may still have them
cheers
Re: Polo 6n 16v bits
Posted: Wed Apr 13, 2011 8:28 pm
by cornishdrummer
6n black, rear view mirror base ?