Page 1 of 1

Foam under glove box

Posted: Mon Jan 10, 2011 10:42 am
by cornishdrummer
The foam under my glove box has droped a little and is hanging slightly on the left side. I have tucked it all back in using a flat head screwdriver, but it has fallen again.

Has anyone got any ideas or tips to help me sort this one.

Thanks

Cornishdrummer

Re: Foam under glove box

Posted: Mon Jan 10, 2011 10:46 am
by alexperkins
Happens to all of them. Get a big cable tie and strap it up over the top of the fan unit and make two puncture holes in the foam underneath to hold it into place when its tied.

Re: Foam under glove box

Posted: Wed Jan 12, 2011 9:36 pm
by cornishdrummer
Thanks Alex, it has done the trick.

Im thinking about putting an eyelet in each of the holes just to make them a bit more securer as the foam aint the strong.