doyler eurod 6n with 6n2 front and US side markers
Posted: Tue Mar 15, 2011 6:43 pm
well guys you's all me well most of you's do. The plan was to get an ek civic mind was set on it seen no for £280 add 80000 miles 98 was hit at the front needed a wing bonnet and headlight but didnt care because was going to put a face lift front on it any way but tried and tried to get down and pick it up but long story short it didnt happen
but a week later this happen to come a long and a thought yano what why da F**k NOT seen a few before and knew it could be turned in to something nice and different and since there's no end till the a mount of civics in the town. I wanted something that would stand out
as i do body repair i will be doing all the work my self every last bit let me no what yas think all comments and advice welcome
TO COME
JAP SPEC 6N2 GTI FRONT BUMPER WITH U.S SIDE MARKERS
SMOOTHED HALF 6N2 HALF 6N REAR BUMPER
SMOOTHED PETROL CAP
SMOOTHED SILLS AND JACKING POINTS
SMOOTHED DOOR RECESS AND DE LOCKED HANDLES
SMOOTHED INDICATORS
6N2 GTI GRILL WITH BADGE WRAPPED IN CARBON
WINGS WELDED TO THE SILLS
1.5 NEGATIVE CAMBER
13X10 WHEELS @ REAR
13X8 WHEELS @ FRONT
COILOVERS AS LOW AS I CAN GO
URBAN CAMO INTERIOR :p
AND LOADZZZZZZZ MORE CANT THINK LOL
Heres some pictures when a got it



it was a clean car in and out for a 96 first on the the list was some central locking



first job on the list it to remove the front bumper


then i smoothed my petrol cap






then cut out plates to weld up my boot lid and inductors





my custom eye brow in the making and badgeless still A LOT TO DO...............

got some camber shims today CAMBER OOOOOOOHHHHHHHHHHHH YEEEEEAAAAAAAAAH
and a new 16v front that's going to get a lot of smoothing


TO COME
JAP SPEC 6N2 GTI FRONT BUMPER WITH U.S SIDE MARKERS
SMOOTHED HALF 6N2 HALF 6N REAR BUMPER
SMOOTHED PETROL CAP
SMOOTHED SILLS AND JACKING POINTS
SMOOTHED DOOR RECESS AND DE LOCKED HANDLES
SMOOTHED INDICATORS
6N2 GTI GRILL WITH BADGE WRAPPED IN CARBON
WINGS WELDED TO THE SILLS
1.5 NEGATIVE CAMBER
13X10 WHEELS @ REAR
13X8 WHEELS @ FRONT
COILOVERS AS LOW AS I CAN GO
URBAN CAMO INTERIOR :p
AND LOADZZZZZZZ MORE CANT THINK LOL
Heres some pictures when a got it



it was a clean car in and out for a 96 first on the the list was some central locking



first job on the list it to remove the front bumper


then i smoothed my petrol cap






then cut out plates to weld up my boot lid and inductors





my custom eye brow in the making and badgeless still A LOT TO DO...............

got some camber shims today CAMBER OOOOOOOHHHHHHHHHHHH YEEEEEAAAAAAAAAH
and a new 16v front that's going to get a lot of smoothing












