Page 1 of 1
too ambitious?
Posted: Wed Mar 16, 2011 11:30 pm
by Gtimatt
possibly getting a milltek catback next month. how difficult is it to fit? im not sure what a garage will cost yet. but wonder if its worth me giving it a shot first
main problem i think will be getting decent access under the car :/
Re: too ambitious?
Posted: Thu Mar 17, 2011 12:21 am
by kc
without decent access you struggle mate, its the bit around the rear beam and fuel tank that takes the pish!
get it on the ramps its much easier!
Re: too ambitious?
Posted: Thu Mar 17, 2011 9:31 am
by Baldchap
Got a pit in the Midlands you're welcome to use if you get no better offers.
Re: too ambitious?
Posted: Thu Mar 17, 2011 4:16 pm
by Turbomier
i have done it a few times on my polo, takes me + friend about 1 hour to take the stock exhaust off and put the milltek underneath.
it's quit easy, but be carefull with the bolts that hold the downpipe attached to the turbo, they are not that strong and dare to rust a bit.
so it is possible that you break one...
Re: too ambitious?
Posted: Sat Mar 19, 2011 10:42 pm
by matt_123
you would need decent access help a mate of mine fit one and like kc said above the bit around the rear beam is a right b***h, but give it a go matey can only try
get good satifaction if you done it yourself!
Re: too ambitious?
Posted: Sat Mar 19, 2011 10:45 pm
by Gtimatt
I think il have a proper look at it first, when I have the exhaust and take it from there lol