Page 1 of 1
What milltek on my 1.9tdi?
Posted: Thu May 26, 2011 9:15 am
by MODDED9N
Looking to change the entire exhaust system on my 1.9tdi to a full milltek system. Found this on the internet:
http://cgi.ebay.co.uk/golf-mk4-milltek- ... 2310d1535d
Anybody know how you can tell if it is non-resonated or not?
What else do I need for the full system? This?
http://cgi.ebay.co.uk/Milltek-DeCat-dow ... 4aa9893bd7
Thanks
Re: What milltek on my 1.9tdi?
Posted: Thu May 26, 2011 9:59 am
by chris meardon
not sure if miltek produce a system for the TDI buddy.
Re: What milltek on my 1.9tdi?
Posted: Thu May 26, 2011 10:34 am
by MODDED9N
Heres a full tdi milltek system
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 7727wt_907
and on the auction, it says it fits a diesel.
Re: What milltek on my 1.9tdi?
Posted: Thu May 26, 2011 10:54 am
by Gillen
That's for the mk4 Golf though buddy.
They don't list an exhaust for the Polo apart from the GTI.
You could contact them and see if they can tell you whether you could fit the Fabia vrs one or Ibiza (mk4) one with a bit of adjusting?
Re: What milltek on my 1.9tdi?
Posted: Thu May 26, 2011 10:59 am
by chris meardon
Is that not for a golf tdi? although the engine is the same i would imagine the exhaust layout would be different as well as the length.
no expert though, may be proved wrong
Re: What milltek on my 1.9tdi?
Posted: Thu May 26, 2011 11:27 am
by MODDED9N
Here is a youtube link to a full milltek on youtube on a 1.9 tdi.
https://www.youtube*.com/watch?v=vMntEz9EUFM
If I bought that back box and that pipe then sure it would fit because that pipe system is designed for a polo gti!
Re: What milltek on my 1.9tdi?
Posted: Thu May 26, 2011 11:42 am
by chris meardon
Thats interesting. I would call miltek directly and ask them how different they are.
Re: What milltek on my 1.9tdi?
Posted: Thu May 26, 2011 1:38 pm
by MODDED9N
To get it done professionally= £596. Looks like I will be saving up for a wee while!
Re: What milltek on my 1.9tdi?
Posted: Thu May 26, 2011 4:58 pm
by whitegtipolo
MODDED9N wrote:Here is a youtube link to a full milltek on youtube on a 1.9 tdi.
https://www.youtube*.com/watch?v=vMntEz9EUFM
If I bought that back box and that pipe then sure it would fit because that pipe system is designed for a polo gti!
looks like they fitted polo gti from middle section back tbh