Page 1 of 2

HELP AND ADVISE NEEDED with my 6N2

Posted: Mon Jun 13, 2011 12:59 am
by r12nuts
Hi people
finaly have taken the first step on moding my 6n2, got me some coilies but im haveing an issue...

has anyone has this issue?

my drivers side front wheel has a slant on top, leaning in.
ive changed the shocks twice, first a used one then a new on, also changed the wishbone but no difference.
tried the camber and thats pulled to the max.
also when i lock the steering to the left, it has a pull and wont come back but will when steered to the right? {when driveing}
the only thing left is hub which is my next step on tuesday but just needed to know if i should consider somthing else...?
heres a picture hope it can be noticed...

Image

thanks

Re: HELP AND ADVISE NEEDED with my 6N2

Posted: Mon Jun 13, 2011 9:31 am
by cornishdrummer
Is your wheel put on straight ? are you useing the same size wheel nuts ? Is there any dirt blocking the wheel from going on square ? Is there any other reason your wheel aint going on square ?

Sorry prob not a lot of help but hope you get it sorted. Nice Car tho :D

Re: HELP AND ADVISE NEEDED with my 6N2

Posted: Mon Jun 13, 2011 10:04 am
by r12nuts
cornishdrummer wrote:Is your wheel put on straight ? are you useing the same size wheel nuts ? Is there any dirt blocking the wheel from going on square ? Is there any other reason your wheel aint going on square ?

Sorry prob not a lot of help but hope you get it sorted. Nice Car tho :D
Hi m8
thanks but not as half nice as yours. seeing all the polos that are moded is makeing me inpactiant lol
trust me ive checked all i can, this issue is doing my head in. its the only thing stoping me from my mods, hopeing its not anything big...

Re: HELP AND ADVISE NEEDED with my 6N2

Posted: Mon Jun 13, 2011 10:53 am
by red6n2
take the wheel off and check the hub mate,

also patience is the key to modding ive rushed a few bits and ive always had to redo, scrap bits cause of it, take your time and all will fall into place niceky :D

Re: HELP AND ADVISE NEEDED with my 6N2

Posted: Mon Jun 13, 2011 11:24 am
by r12nuts
red6n2 wrote:take the wheel off and check the hub mate,

also patience is the key to modding ive rushed a few bits and ive always had to redo, scrap bits cause of it, take your time and all will fall into place niceky :D
yours is looking nice, simple but effective.

gonna try my brothers hub 2moro cos he has the same car, saves me from buying a new one {for now}

ta m8

Re: HELP AND ADVISE NEEDED with my 6N2

Posted: Mon Jun 13, 2011 11:28 am
by cornishdrummer
r12nuts wrote:
Hi m8
thanks but not as half nice as yours. seeing all the polos that are moded is makeing me inpactiant lol
Cheers Mate, no need to rush take your time. :D

Re: HELP AND ADVISE NEEDED with my 6N2

Posted: Mon Jun 13, 2011 11:34 am
by red6n2
just note this may/probably will put your tracking off, its slightly strange that the lean is at the top and not the bottom is the car a CAT D ? or been in any knocks that you know of ? any damage around surrounding pannels ?,

cheers, im gonna take a bit of a back seat with the car as of next month wanna start redeccorating my house,

Re: HELP AND ADVISE NEEDED with my 6N2

Posted: Mon Jun 13, 2011 11:38 am
by cornishdrummer
Jord you always take a back seat mate :D

Re: HELP AND ADVISE NEEDED with my 6N2

Posted: Mon Jun 13, 2011 12:03 pm
by r12nuts
red6n2 wrote:just note this may/probably will put your tracking off, its slightly strange that the lean is at the top and not the bottom is the car a CAT D ? or been in any knocks that you know of ? any damage around surrounding pannels ?,

cheers, im gonna take a bit of a back seat with the car as of next month wanna start redeccorating my house,
it has had a knock but it was minor really, just replaced the wing.
i have had it tracked twice, the first time they told me it was the wishbone, dont think even they know what the issue is. the sub frame looks straight.
the way to check chassis damage is to look under the hood and check to see if any of the bolts have moved and in my case their all straight.
hopeing it is the hub

Re: HELP AND ADVISE NEEDED with my 6N2

Posted: Tue Jun 14, 2011 10:28 pm
by r12nuts
its really doing my nut in now.
had some more bad luck today, my brothers hub is completely seized and no way i can take it off so there for i have no choice but to get a new one.
one thing i did come out with, a serious tan lol

heres a pic of the work i carried out today...
Image

Re: HELP AND ADVISE NEEDED with my 6N2

Posted: Wed Jun 15, 2011 5:24 pm
by r12nuts
to make things worse the coilies i bought are the wrong ones!! it was advertised for a mk5 which is 6n but just now as i opend them i realised they are for mark6, 9n?
:x
the lady who sold them on behalf of her son has messd me up even more and daught she will refund them so if anyones looking for some coilies, brand new.

Re: HELP AND ADVISE NEEDED with my 6N2

Posted: Wed Jun 15, 2011 7:32 pm
by cornishdrummer
If you got them from ebay/phone/or any other internet site mate you should be able to get a refund under the Distance Selling Regulations it says "you must give consumers clear information including details of the goods or services offered" which they did not as they gave you the wrong information about the item and also it says "the consumer has a cooling-off period of seven working days" Hope this helps you.

Re: HELP AND ADVISE NEEDED with my 6N2

Posted: Wed Jun 15, 2011 11:38 pm
by r12nuts
cornishdrummer wrote:If you got them from ebay/phone/or any other internet site mate you should be able to get a refund under the Distance Selling Regulations it says "you must give consumers clear information including details of the goods or services offered" which they did not as they gave you the wrong information about the item and also it says "the consumer has a cooling-off period of seven working days" Hope this helps you.
Hi m8
yeh got them from ebay, the lady called me today and asked what i wanted so i satated i wanted a refund...shes gonna call me back friday to organise collection.

its just means ive still gotta get some coilies for mine :(

thanks!

Re: HELP AND ADVISE NEEDED with my 6N2

Posted: Thu Jun 16, 2011 7:25 am
by cornishdrummer
Thats good news about the refund Distance Selling Regulations are always good to know and use if you aint happy with something you got online.

These any good http://www.veedubmachine.co.uk/index.ph ... cts_id=695

Re: HELP AND ADVISE NEEDED with my 6N2

Posted: Thu Jun 16, 2011 9:43 am
by r12nuts
cornishdrummer wrote:Thats good news about the refund Distance Selling Regulations are always good to know and use if you aint happy with something you got online.

These any good http://www.veedubmachine.co.uk/index.ph ... cts_id=695
Thats a deal, thanks!
are they any good?