Page 1 of 1
1.0 induction help?
Posted: Tue Jul 12, 2011 1:46 pm
by benmkiv
Want some sort of induction. Are they fairly universal? Really interested in the bmc's bit they don't manufacture specifically for 1.0litre any help appreciated
Re: 1.0 induction help?
Posted: Mon Jul 18, 2011 6:25 pm
by poke360
Mate Ive got one on mine is it great. Alot louder than I thought it would be. 3000 is the sweet spot. Worth getting if you want some noise. Only down side is cruising down the motorway it gets annoying but just turn the radio up. Hope this helps.
1.0 induction help?
Posted: Wed Jul 20, 2011 8:43 pm
by benmkiv
Which did you buy mate?
Re: 1.0 induction help?
Posted: Thu Jul 28, 2011 8:14 pm
by poke360
BMC mate
1.0 induction help?
Posted: Thu Jul 28, 2011 11:06 pm
by benmkiv
On your 1 litre and is it just one model of bmc for all polo 6n2s?
Re: 1.0 induction help?
Posted: Sat Jul 30, 2011 4:24 pm
by Bepe
it doesnt matter on the size of the air filter, it could be the size of a tree and it still wouldnt make a difference, your car is fly by wire and has a MAP so it controls how much air is sucked into the engine, they say the size of the engines on the bmc becasue of different size throttle bodies so it comes with the right size adapters etc etc.
ive got a pipercross filter that i dont use any more, after £40 deliverd, you can pic up the right size 90 degree bends on ebay for your little 1.0 throttle body and if i remember correctly there about 53mm in diamter? i may even have one kicking about somewhere
1.0 induction help?
Posted: Sat Jul 30, 2011 5:15 pm
by benmkiv
How would the pipercross sound on it do you reckon? Just want a nice engine note to hide the whine a bit
Re: 1.0 induction help?
Posted: Sat Jul 30, 2011 5:23 pm
by Bepe
it will sound nice and beefy mate
1.0 induction help?
Posted: Sat Jul 30, 2011 5:32 pm
by benmkiv
Is the pipercross just a cone filter? Or sealed units like the bmc?
Re: 1.0 induction help?
Posted: Sat Jul 30, 2011 5:40 pm
by Bepe
open cone filter, you wont really here much change in noise with an enclosed filter thats why many moons ago i had a 1.0 i had an open cone filter
1.0 induction help?
Posted: Sat Jul 30, 2011 5:48 pm
by benmkiv
Appreciate that info mate. May have to take you up on that offer then just not too much money at the moment
Re: 1.0 induction help?
Posted: Sat Jul 30, 2011 5:56 pm
by Bepe
no worries mate, i have another pipercross filter too its BRAND new but the metal tubing is abit batterd, doesnt affect it or anything, can be coverd up quite nicely with some silicone or something, only want £25 for that one its the same as this:
http://www.pipercross.net/downloads/pip ... ionkit.jpg
the other one at £40 i cant find a similar pic of that one