cup edition alloys 9n3 17"
Posted: Fri Aug 12, 2011 10:27 pm
wanted polo gti cup edition alloys 9n3
Uploaded with ImageShack.us
this is what the alloys look like anyone got these in 17"
UK-POLOS.NET - THE VW Polo Forum
Probably the Worlds greatest Polo resource
https://www.uk-polos.net/
cup edition alloys 9n3 17"
Page 1 of 1
Re: cup edition alloys 9n3 17"
Posted: Tue Aug 16, 2011 6:34 am
Re: cup edition alloys 9n3 17"
Posted: Tue Aug 16, 2011 11:47 pm
your really going to struggle to get the cup edition alloys in the uk mate as the cup edition was never released here you best bet 9n.info in germany and german ebay... or UK stealers (i think have them) ...
Re: cup edition alloys 9n3 17"
Posted: Sat Aug 20, 2011 9:58 pm
thanks for the reply i can get them cost £2000 no tyres from vw absolute nightmare i've got the full cup edition bumpers looking for the side skirts whats UK stealers can you send me their website through PM or post me a link pleaseDub_Dan wrote:your really going to struggle to get the cup edition alloys in the uk mate as the cup edition was never released here you best bet 9n.info in germany and german ebay... or UK stealers (i think have them) ...
cup edition alloys 9n3 17"
Posted: Sun Aug 21, 2011 1:17 pm
They look very similar to VW Aristas
Re: cup edition alloys 9n3 17"
Posted: Sun Aug 21, 2011 6:04 pm
thanks for the reply does anyone know where i can get a set from in the uk ?
cup edition alloys 9n3 17"
Posted: Sun Aug 21, 2011 11:36 pm
Aristas? They were fitted to the mkIV r32 so there should be a few sets knocking about...
Re: cup edition alloys 9n3 17"
Posted: Sun Aug 21, 2011 11:45 pm
I was gonna comment saying try get them off an R32 but didnt wanna be wrong hahah!
Re: cup edition alloys 9n3 17"
Posted: Sun Aug 21, 2011 11:48 pm
Re: cup edition alloys 9n3 17"
Posted: Mon Aug 22, 2011 9:40 am
The r32 wheels are 18", so I'm afraid you would be wrong buddy 
Re: cup edition alloys 9n3 17"
Posted: Mon Aug 22, 2011 10:16 am
I'm looking for these in 17 inch as I have new suspension kit going on gonna lower the car between 15-20mm need 17 I don't have space to fit 18 inches not going to flare my wheel arches if the paint cracks will cost arm and a leg
Re: cup edition alloys 9n3 17"
Posted: Mon Aug 22, 2011 7:34 pm
it would be a case of ringing your local dealer for them mate as no uk dealership will stock them they will be imported from Germany and for the love of god please dont buy replicas they are s**t and awful Quality always stick with OEM or a reputable manufacturer of performance wheels
danny
danny
Re: cup edition alloys 9n3 17"
Posted: Mon Aug 22, 2011 9:52 pm
danny thanks for the reply i have been to the dealership they quoted me £2000 which is absolutely a joke i'd rather spend that money on engine parts or buy a pair or 18 for £330Dub_Dan wrote:it would be a case of ringing your local dealer for them mate as no uk dealership will stock them they will be imported from Germany and for the love of god please dont buy replicas they are **** and awful Quality always stick with OEM or a reputable manufacturer of performance wheels
danny
Re: cup edition alloys 9n3 17"
Posted: Tue Aug 23, 2011 4:11 am
German ebay mate they are much cheaper when they are on there!!! and replicas IMO are a joke ruin your ride (performance and handling) damage a lot easier and never give me the satisfaction that i am using some cheap alloy on my nice polo 