UK-POLOS.NET - THE VW Polo Forum

Am putting these thread together for people to share they ideas on the wheels they have, want, or think would look good on the polo 6r.

As also I want to get an idea of what wheels to get on mine. Black polo moda.

I want lime green steelies 16in 7.5in wide with stretched tyres nom nom.

So please post pics n ideas of what would look good

Or what u have on urs. This will help everyone

Howey man people. Were all the ideas

Must be some lads n lasses on here that would like ideas for alloys and modding

This is what I want my car to look like once done...



That's if ya can see it. And sorry for the s**t photo as my mate was in a rush wen doing it

loads of ideas here https://www.facebook.com/VW.Polo.6r

Areet mate. Already liked this page on fb. Just want to put this up for people on here on ideas for alloys

im putting some bbs rs on mine with stretched tyres and alot of poke

Get a pic up once ya have mate. Been looking at them aswell

Mine...

The traditional Team Dynamics Pro Race 1.2.
These are special order from VWRacing and don't have the cast "Motorsport" logo on the rim. They also are made specifically to fit the hub without needing spigot rings.

17" x 7.5" and ET36. Any lower than the pic below then go for a higher offset of about ET40-42 as initially I was lower than this and got the odd rub under maximum compression in dips, but as they are there is no rub at all.

My 17" porsche cayenne's with 195/40's stretched on them wanting to change them but guna wait for the winter to come and go

Very nice lads bet the Team Dynamics Pro Race cost a bomb mate.

And them Porsche rims mate. What are te details on them. Are there PCD of 112 with Adaptors or what bud

mashmarriner wrote:
Porsche rims mate. What are te details on them. Are there PCD of 112 with Adaptors or what bud

there 135 PCD with the adaptors on so they fit the standard 100 mate

anyone here good with photoshop and fancy doing me a favour?:)

mashmarriner wrote:Very nice lads bet the Team Dynamics Pro Race cost a bomb mate.

Nope Got a very good deal from a member on here.

Hi there gents....im new on here and i am an ex-south african living in Portugal but love this forum with all the useful help and info and great rides....just took delivery of my CW Gti and put on some h&r 25/40 springs already and looking at some alloys now.
I was thinking on some BBS either CH or CH-R in 18" as ive seen them on a red Polo in a turkish forum and quite like them. Just got a question about those...the CH i can get in 8.5x18" et35....and the CH-R in 8x18" et38, now my question is twofold, will th CH in 8.5 get some rubbing as i see most recommendations with an et 35 are 8J and they might be too flush with the fender? and the CH-R with an et 38 wont be flush enough? hope you guys can give some advice on this would be much appreciated. Tires will be 215/35/18.

LocoPolo70 wrote:the CH i can get in 8.5x18" et35....and the CH-R in 8x18" et38, now my question is twofold, will th CH in 8.5 get some rubbing as i see most recommendations with an et 35 are 8J and they might be too flush with the fender? and the CH-R with an et 38 wont be flush enough? hope you guys can give some advice on this would be much appreciated. Tires will be 215/35/18.

Stick to the CH-R 18x8.0...not only do these wheels look better, but the CH 8.5 is too wide with those springs installed.

See the below post and scroll to bottom. The grey TSI has H&R 25/40 springs with 18x8 +35 225/35 and they sit flush. You will get rubbing with 8.5 et35.

http://www.vwwatercooled.org.au/forums/ ... 59-10.html

18s look too much for my liking tbh. Makes the car look alot higher