Page 1 of 1
Wiper...
Posted: Thu Oct 13, 2011 4:34 pm
by red6n2
How in the hell does this...

[/IMG]
Come off ?. :-s
Changed the mrs boot for a second time after being sold a s**t one done it all except the wiper motor/arm. And I've tried convincing her to have it de Wipered but she's not having it.
Re: Wiper...
Posted: Thu Oct 13, 2011 4:36 pm
by 9N3 Turbo
Believe it or not it just pulls off.
When the nut is tightened on it pushes it on to the spline which tapers out the further it goes down.
Good luck
Wiper...
Posted: Thu Oct 13, 2011 5:12 pm
by red6n2
s**t... Arnie must have tightened this nut then, I mean I've dewipered my car a 6n2 if you couldn't tell

and it was nowhere near as tough as this I've smacked it with hammers sprayed it with wd40 and gone professor xavier on it bit nothing works... And I'm without trying to sound big headed or anything quite a strong guy... :-/ I'm gonna soak it in wd40 and just try rip it apart
Thanks for all your help Dude.
Re: Wiper...
Posted: Thu Oct 13, 2011 5:30 pm
by POLOZ
red6n2 wrote:****... Arnie must have tightened this nut then, I mean I've dewipered my car a 6n2 if you couldn't tell

and it was nowhere near as tough as this I've smacked it with hammers sprayed it with wd40 and gone professor xavier on it bit nothing works... And I'm without trying to sound big headed or anything quite a strong guy... :-/
I'm gonna soak it in wd40 and just try rip it apart
Thanks for all your help Dude.
Yup exactly what I did and came off without any further struggle

Re: Wiper...
Posted: Thu Oct 13, 2011 5:34 pm
by Ben90
I removed mine when upgrading to an aero wiper, mine was also stuck pretty firm! I used a screwdriver to prize it off with thin bits of wood to protect the plastic and paint. Work from two opposite sides to 'wiggle' it off.
Oh and wd40

Wiper...
Posted: Thu Oct 13, 2011 5:37 pm
by drennan
Aye i had this with the glass inbetween lol Wher ye need to pull it hard enough to seperate it but not hard enough to smash the window lol and thers no guarantee the window wont smash 1st haa. i just sawed it off. Blanked it
Re: Wiper...
Posted: Thu Oct 13, 2011 7:20 pm
by vince
You need one of these mate

Wiper...
Posted: Thu Oct 13, 2011 8:52 pm
by red6n2
Ahhh that looks like it's do the job a treat...
Till then I may make do with this...
