Page 1 of 2
What you think of these Alloys
Posted: Fri Dec 30, 2011 11:07 am
by CANDYMAN
Re: What you think of these Alloys
Posted: Fri Dec 30, 2011 11:23 am
by AJ_7
As you said your not a lover of black wheels. I think these would look tidy on a Polo.
http://www.wheelbasealloys.com/17_Inch_ ... eels__2847
Re: What you think of these Alloys
Posted: Fri Dec 30, 2011 11:54 am
by NeilMcConville
Agreeing with AJ_7
What you think of these Alloys
Posted: Fri Dec 30, 2011 1:22 pm
by drennan
Also agreeing best of a bad bunch
what biut come comps? Borbet As? Boxter s? Lm's? Corvette sawblades
Re: What you think of these Alloys
Posted: Fri Dec 30, 2011 2:49 pm
by CANDYMAN
But what makes a bad looking alloy? Or is it not better to break out of the box? and try something differant.
Re: What you think of these Alloys
Posted: Fri Dec 30, 2011 5:12 pm
by Dub_Dan
bbs without a shadow of a doubt mate the rest look Sh1t and chavy IMO
What you think of these Alloys
Posted: Fri Dec 30, 2011 5:42 pm
by drennan
SAMBA VAN MAN wrote:But what makes a bad looking alloy? Or is it not better to break out of the box? and try something differant.
What makes a bad anything? Just personal choice. U want differant? Have u ever seen corvette sawblades on a polo?
What you think of these Alloys
Posted: Fri Dec 30, 2011 5:42 pm
by drennan
Re: What you think of these Alloys
Posted: Wed Jan 18, 2012 6:01 pm
by CANDYMAN
Re: What you think of these Alloys
Posted: Wed Jan 18, 2012 10:26 pm
by AAddict
They will look brilliant, but the car will need to be loooooooooow to pull them off.
Re: What you think of these Alloys
Posted: Thu Jan 19, 2012 11:50 am
by Hurdy
At 8" wide you'd also need to ensure the offset was spot on.
I love Schmidt alloys though.
Re: What you think of these Alloys
Posted: Thu Jan 19, 2012 2:23 pm
by CANDYMAN
So what ET do you reakon to get with these Schmidt wheels?
Do you reakon 16" 17" or 18"
Re: What you think of these Alloys
Posted: Fri Jan 20, 2012 1:38 am
by Hurdy
SAMBA VAN MAN wrote:So what ET do you reakon to get with these Schmidt wheels?
Do you reakon 16" 17" or 18"
8" x 17" would look just right.
the OEM wheels are 17x7 at ET46, so I'd be looking at ET40. The inner arch/strut should just clear at that with an extra 6mm of poke on the outside to bring it that little bit nearer flush.
Re: What you think of these Alloys
Posted: Fri Jan 20, 2012 2:23 am
by nodoze
SAMBA VAN MAN wrote:So what ET do you reakon to get with these Schmidt wheels?
You need to be looking at ET35-38 for an 8 inch rim.
Re: What you think of these Alloys
Posted: Sat Jan 21, 2012 5:38 pm
by CANDYMAN
Just had an email back from rim style and they said they would sell these wheels with et32
they are gonna rub on something.
