UK-POLOS.NET - THE VW Polo Forum

Hey guys, I have a black Polo 9N and am in desperate need of some parts for her! If you have any of these or know anyone who does, please PM me or e-mail at [email protected]!

The parts I'm looking for are as follows:
Polo 9N front bumper - black
Polo 9N front grille (preferably with badge)
Polo 9n3 GTi rear valance (slightly bigger cut-out for GTi dual exhaust pipes)
Polo 9n3 GTi back box (dual exhaust pipes)

I'm also after any hints/tips on removing bump strips & wing mirror covers, as well as any guides on the best way to DIY colour code them with the rest of the car.

Thanks!
C.

Hi mate, just pull up on the mirror covers. Well that's what I did :/ as for the rub strips they will leave holes in the body work which need welding and filling and painting. Mine 9n is black too. Sport 16v which is 15mm lower than standard, I'm lowering mine in the next couple of weeks if you want the springs off of mine let me know.

How do you remove the bump strips? I'm going to sand them down smooth, primer, paint and lacquer so they are the same colour as my car and not that foul plastic stuff! Don't need the springs mate, I'm going to drop the car about 45mm soon myself if i can find any cheap enough springs. By the way, do you know if I need shorter drop-links if I'm going down 45mm from standard?

Cheers, C.