UK-POLOS.NET - THE VW Polo Forum

Hey guys!

I've found a cheap mk1 leon cupra r splitter for sale and was wondering how easy it would be to fit to my polo 9n3?
would it require modifying or just drill and screw straight on?

Any advice would be grand

Thanks

Probably a bit of trimming they're never a perfect fit but wouldn't be too hard we fitted one to a TT and it looks sweet but of trimming and then self tapping screws into the bumper wasn't a hard job would be just as easy on the polo idninagine.

The ends will need trimming down a bit as well as the 2 props on the front it's a simple job. Less simple part being you need to raise the car at the very least, or for a better fit you can take the bumper off.

http://www.vwwatercooled.org.au/forums/ ... 76-10.html

Little guide halfway down.

Cheers for the help guys thanks a lot i've bought it now should be fitting it thursday

I have one on mine if you need to look at that ..