Page 1 of 1
milltek
Posted: Sat May 19, 2012 12:08 pm
by shawnged
Slight rattle coming from my milltek after fitment feels as though the rattle is coming from directly under the drivers seat do all the oxygen sensors need to be connected or blanked. Just rattles taking off in first gear leading to second?
milltek
Posted: Tue May 22, 2012 3:15 pm
by Chris.T_pologti
Check its not hitting your heat shield!! Mine was rattling there so i used a "tapping stick" and persuaded it out of the way
Re: milltek
Posted: Mon May 28, 2012 10:45 pm
by Gtimatt
my gti makes a rattle under acceleration and I've got a milltek on. sounds like its coming from the front *ish* area of the car, i'll have to look into this, you might have saved me a lot of worry lol!
Re: milltek
Posted: Tue May 29, 2012 7:18 pm
by shawnged
Yeah av not actually addressed the situation yet could possibly be the heat shield i maybe thought it was the bracket kinda in the middle of the underside aswell.
Re: milltek
Posted: Tue May 29, 2012 9:47 pm
by Crippin
Mines started rattling & I've got the miltek exhaust on it also!
I presumed it was just the plastic bits near the wishbone giving out a little rattle. Mine seems to feel like it coming from both, passenger and drivers side front wheel area. Obviously not lol.