Page 1 of 1
Forge short Shifter.
Posted: Thu Jul 12, 2012 3:38 pm
by Mr Blobby
Im looking at getting a short shifter and just want to be sure im looking at the right one...
Could someone please confirm that this will fit my 2007 Polo GTi 9n3?
http://www.forgemotorsport.co.uk/conten ... t=FMVAG5QS
Many thanks

Re: Forge short Shifter.
Posted: Thu Jul 12, 2012 4:08 pm
by rover220
Bit pointless. My gti isn't exactly long throw, feels even better after I've driven the van all week!
Re: Forge short Shifter.
Posted: Thu Jul 12, 2012 5:44 pm
by buzzmotorsport
He asked if it would fit.. not if your gti's gear throw is short enough for you.
I know our Gti's use the same gearbox as the mk4 cupra 1.8t so it should fit, ring forge if your not sure
Alex
Re: Forge short Shifter.
Posted: Thu Jul 12, 2012 7:13 pm
by Simon90
I rang forge about this
Ask as the Ibiza is the same would it fit
The reply was Erhhh not sure haha
I say buy it, if it don't fit send it back

Re: Forge short Shifter.
Posted: Thu Jul 12, 2012 8:11 pm
by Mr Blobby
Cheers for that guys

I think I'll give them an email or something.
Anyone had any experience with it before? Any reviews or anything would be helpful!
Re: Forge short Shifter.
Posted: Thu Jul 12, 2012 8:39 pm
by Turbomier
it will fit don't worry...
Ibiza with BJX engine is exacly the same as the polo GTI.
so i'm 200% sure it will fit youre gearbox also
you do know it is not a verry good solution for youre gearbox and it does have some drawbacks..?
not really my bussiness but i just wanne give you a heads up before buying something you might regret afterwards, or you get problems with it while we could have told you from the beginning

Re: Forge short Shifter.
Posted: Thu Jul 12, 2012 8:51 pm
by Mr Blobby
Turbomier wrote:it will fit don't worry...
Ibiza with BJX engine is exacly the same as the polo GTI.
so i'm 200% sure it will fit youre gearbox also
you do know it is not a verry good solution for youre gearbox and it does have some drawbacks..?
not really my bussiness but i just wanne give you a heads up before buying something you might regret afterwards, or you get problems with it while we could have told you from the beginning

Thanks for letting me know

What are the drawbacks then? I have no idea about the shifter so whatever you can tell me would be a great help
Re: Forge short Shifter.
Posted: Thu Jul 12, 2012 9:00 pm
by Turbomier
youre syncho's will suffer alot more than needed, specially when the engine is cold.
problem is, if you do want a decent short shifter you better get a complete tower but that is expensive.
but than again, loosing syncho's would not be that much cheaper...
Re: Forge short Shifter.
Posted: Fri Jul 13, 2012 9:49 am
by Mr Blobby
Turbomier wrote:youre syncho's will suffer alot more than needed, specially when the engine is cold.
problem is, if you do want a decent short shifter you better get a complete tower but that is expensive.
but than again, loosing syncho's would not be that much cheaper...
Hmm that's a shame... I quite fancied the idea of it. But the gti hasn't got long gear throws anyway so I'll live with it ha. Thanks

Re: Forge short Shifter.
Posted: Fri Jul 13, 2012 11:10 pm
by Turbomier
you could be a lucky one without having problems...
i'm just telling it like it is and i've seen to many gearboxes go to waste with such "upgrades"
as long as it works, it's fine and all is well, but it's a mather of time for when it does go wrong...
Re: Forge short Shifter.
Posted: Sat Jul 14, 2012 12:07 pm
by Mr Blobby
Turbomier wrote:you could be a lucky one without having problems...
i'm just telling it like it is and i've seen to many gearboxes go to waste with such "upgrades"
as long as it works, it's fine and all is well, but it's a mather of time for when it does go wrong...
Okay, we'll thanks alot as I would never have know all that if you hadn't told me.
I may just buy it and see if it makes much of a difference. It doesn't seem hard to fit and it doesn't cost much so it's no biggy if it's rubbish.
Thanks again

Forge short Shifter.
Posted: Sun Jul 15, 2012 2:51 am
by noone025
A few of us from VWW forum have done this as well as upgrading the bushes. I like the change, not sure why shortening the shirt would damage the synchro if you shift normally. For me the big difference is that I don't lean forward a little to shift into 1,3&5. Installation can be done without removing the battery, but not easy.
Re: Forge short Shifter.
Posted: Sun Jul 15, 2012 11:05 am
by Mr Blobby
noone025 wrote:A few of us from VWW forum have done this as well as upgrading the bushes. I like the change, not sure why shortening the shirt would damage the synchro if you shift normally. For me the big difference is that I don't lean forward a little to shift into 1,3&5. Installation can be done without removing the battery, but not easy.
Hmm okay, what bushings did you change? And what did you upgrade them too?
Cheers.
Forge short Shifter.
Posted: Mon Jul 16, 2012 2:00 am
by noone025
Can't remember the details mate, feel free to come look on VWW