Page 1 of 1

Induction help

Posted: Sun Jul 15, 2012 12:21 pm
by Lowthy1989
Would this fit onto my 1.8t polo??

http://item.mobileweb.ebay.co.uk/viewit ... 3478675947

Or would I need to get a reducer? Looked all over the net for neck diameters but couldn't find anything?!

Anyone shed some light for me please?

Re: Induction help

Posted: Sun Jul 15, 2012 8:42 pm
by Bogwoppit
The MAF on your Polo 1.8T is 70mm outside diameter, so you are going to need some kind of silicone reducer to go from 70mm to the neck size on that filter (100mm?).
You will also need a bracket to support the MAF and filter, and you will need a breather filter too, to fit on the SAI hose.

Re: Induction help

Posted: Sun Jul 15, 2012 9:27 pm
by Lowthy1989
Thank you

I got a set up on there at the moment but couldn't remember what size it was and didn't fancy getting soaked to find out!