Page 1 of 1
Fitting Forge intecooler...
Posted: Wed Jul 25, 2012 7:40 pm
by Mr Blobby
So I will be fitting my new intercooler soon, Im guessing its not a bad job as it comes with instructions and stuff but just wondered if anyone has any tips for me?
How do you take the bumper off as I've not done it yet...
Cheers!
Re: Fitting Forge intecooler...
Posted: Wed Jul 25, 2012 7:53 pm
by rover220
its very easy. ignore the instructions to be honest.
only tip i would give is support the weight of the rad pack when you remove the crash bar as itll stop it sagging.
Re: Fitting Forge intecooler...
Posted: Wed Jul 25, 2012 8:03 pm
by Mr Blobby
Cheers
Little things like this all help!
I know i can do it but still, how do you remove the bumper?
Re: Fitting Forge intecooler...
Posted: Wed Jul 25, 2012 8:07 pm
by rover220
3 screws in each arch, 8 in and around the grille, remove under tray and i think theres 4 screws that attach the bumper to the rad pack underneath.
Re: Fitting Forge intecooler...
Posted: Wed Jul 25, 2012 8:19 pm
by Mr Blobby
Excellent
Thanks.
Re: Fitting Forge intecooler...
Posted: Thu Jul 26, 2012 11:28 pm
by Gillen
It tells you in the instructions about supporting the radiator and removal of the front bumper, so I wouldn't suggest ignoring the instructions as mentioned.
It is very easy if you just follow the instructions and I had no problems fitting mine and I'm a novice!
Fitting Forge intecooler...
Posted: Fri Jul 27, 2012 3:32 am
by noone025
Download the instruction from the website, pretty comprehensive...