Page 1 of 1

Anti-roll bar diam's?

Posted: Fri Aug 03, 2012 7:37 pm
by lsr-photographic
I'm going to be ordering a set of powerflex bushes (full suspension set) so I can get them all changed when I do the coilovers; however the supplier needs to know the diameter or my anti-roll bars, the front look about 16-18mm? But can tell the back...any kind of database that would give me this info based on reg/chassis number?

If anybody knows my cars a 3dr 1.4 8v (believed to be a match?) 2000 plate

Re: Anti-roll bar diam's?

Posted: Sun Aug 05, 2012 3:13 pm
by georgen
Doesnt have a rear ARB ?, unless its had an after market one fitted.

Re: Anti-roll bar diam's?

Posted: Sun Aug 05, 2012 7:39 pm
by lsr-photographic
I didn't think it did! (didn't want to say that it didn't unless i was just being blind)

I'll get half on a kerb and have a measure; cheers

Re: Anti-roll bar diam's?

Posted: Wed Aug 08, 2012 10:08 am
by TRiBaL
it depends on whether it has power steering or not.