UK-POLOS.NET - THE VW Polo Forum

Hey everyone I really miss my cruse control from my last car since I don't have it in my current polo gti and was wondering where do I buy the kit from to make it available on my car? Seen a few of you have done this any advice is very much appreciated

That's a real bad stutter you've got there....

John

kufatec is the only place i know of.

they dont do kits if you have the mfd though.

come in at about 90 euros too

I've done it to my 6n2 gti. What gti are you wanting to do it on?

It's really easy on a 6n2 if you can solder and got access to vag-com

rover220 wrote:kufatec is the only place i know of.

they dont do kits if you have the mfd though.

come in at about 90 euros too

They do kits for both. With or without. Both 99 Euro's.

With MFD
http://www.kufatec.de/shop/en/Volkswage ... VW-Polo-9N

WIthout
http://www.kufatec.de/shop/en/Volkswage ... -w/out-MFD

9N3 Turbo wrote:

rover220 wrote:kufatec is the only place i know of.

they dont do kits if you have the mfd though.

come in at about 90 euros too

They do kits for both. With or without. Both 99 Euro's.

With MFD
http://www.kufatec.de/shop/en/Volkswage ... VW-Polo-9N

WIthout
http://www.kufatec.de/shop/en/Volkswage ... -w/out-MFD

what does MFD mean?

morells wrote:

9N3 Turbo wrote:

rover220 wrote:kufatec is the only place i know of.

they dont do kits if you have the mfd though.

come in at about 90 euros too

They do kits for both. With or without. Both 99 Euro's.

With MFD
http://www.kufatec.de/shop/en/Volkswage ... VW-Polo-9N

WIthout
http://www.kufatec.de/shop/en/Volkswage ... -w/out-MFD

does MFD mean?

Multi function display.