Page 1 of 1
1.4 and 1.9 tdi exhausts the same?
Posted: Sun Oct 28, 2012 5:00 pm
by hartge
Hi guys, as title does anyone know if they are the same exhaust or different?
Thanks
Re: 1.4 and 1.9 tdi exhausts the same?
Posted: Tue Oct 30, 2012 9:03 pm
by hartge
part numbers look to be the same from what i can see on Vag part site.
Re: 1.4 and 1.9 tdi exhausts the same?
Posted: Wed Oct 31, 2012 3:35 pm
by RITCHAT
Identical bar the down pipe.
Re: 1.4 and 1.9 tdi exhausts the same?
Posted: Wed Oct 31, 2012 4:21 pm
by hartge
Spoke to my friend at the garage said they were different.
Re: 1.4 and 1.9 tdi exhausts the same?
Posted: Tue Nov 06, 2012 6:05 pm
by greypolo9n3
they are different as the 1.4 tdi is a 3 cylinder..
that said i got the silencer removed on mine and quite pleased with the sound it makes!
Re: 1.4 and 1.9 tdi exhausts the same?
Posted: Tue Nov 06, 2012 6:30 pm
by hartge
im just trying to get an oem one again as the one i have on now is abit too boomy
Re: 1.4 and 1.9 tdi exhausts the same?
Posted: Mon Jan 14, 2013 10:00 pm
by umar-dub
Different exhausts i think
I also tried putting the Polo GTI exhasut on my 1.4 TDI i couldnt get it to fit and neither could the garage.. Crap thing is i went and bought the rear GTI lip spoiler which has the cut out and now you can see the crappy stock exhaust

Re: 1.4 and 1.9 tdi exhausts the same?
Posted: Wed Jan 16, 2013 9:56 am
by greypolo9n3
umar-dub wrote:Different exhausts i think
I also tried putting the Polo GTI exhasut on my 1.4 TDI i couldnt get it to fit and neither could the garage.. Crap thing is i went and bought the rear GTI lip spoiler which has the cut out and now you can see the crappy stock exhaust

Just get a box made for the rear and put tips on..dont need to do the full thing
Re: 1.4 and 1.9 tdi exhausts the same?
Posted: Sun Jan 27, 2013 11:06 pm
by RITCHAT
I have a gti back box fitted to my 9n 1.4 tdi. there is a difference in diameter of half a mm this was easily over come by cutting two small slits in the connecting gti rear box which allowed the pipe to go over my original pipe. I then used exhaust putty to seal and a u clip to keep it in position no problems and it looks the part.