Hey People
Posted: Thu Dec 13, 2012 12:22 pm
Hi there the names Gerry
I'm joining on behalf of my girlfriend as ill be tasked to sort stuff when it goes wrong and i guess it may be my little side project
Any way it's a 1.0 6n2 polo its was picked up for £650.
The rear drivers drum is pretty seized, and the revs have a slight party when idle sometimes.
I recently replaced the passanger indicator housing as someone hit her when she was parked and decided to drive away. The person who fixed it previously had made a mess of it.
from what I could tell parts had been super glued, bits missing, and an excessive amount of bondant/sealent. so for the time being its botched on until after the holidays she can buy a new headlight/headlight casing they are needing polished/buffed up neways so saves me doing that
.
heres a few pictures
bit fuzzy
the back bumper needs a good t-cut
blank out my niece's baby seat.
front with a shiney inicator
a little bit of the sealant stuff put on the indicator and headlight theres loads more on drivers side
The plans are to just getting it working/driving fine then making it a little bit nicer on the eye. Any sort of advice on anything will be much apreciated
For any of you that may be interested my project is a Honda Crx Del Sol VTI my little baby (If this should be moved to different part of forum please say )
white bit on sill is gone
Thanks for looking.
I'm joining on behalf of my girlfriend as ill be tasked to sort stuff when it goes wrong and i guess it may be my little side project
Any way it's a 1.0 6n2 polo its was picked up for £650.
The rear drivers drum is pretty seized, and the revs have a slight party when idle sometimes.
I recently replaced the passanger indicator housing as someone hit her when she was parked and decided to drive away. The person who fixed it previously had made a mess of it.
from what I could tell parts had been super glued, bits missing, and an excessive amount of bondant/sealent. so for the time being its botched on until after the holidays she can buy a new headlight/headlight casing they are needing polished/buffed up neways so saves me doing that
.heres a few pictures
bit fuzzy
the back bumper needs a good t-cutblank out my niece's baby seat.
front with a shiney inicator
a little bit of the sealant stuff put on the indicator and headlight theres loads more on drivers side
The plans are to just getting it working/driving fine then making it a little bit nicer on the eye. Any sort of advice on anything will be much apreciated
For any of you that may be interested my project is a Honda Crx Del Sol VTI my little baby
(If this should be moved to different part of forum please say )white bit on sill is gone
Thanks for looking.