Page 1 of 1
Re: My 1999 6n1 1.4cl Project!
Posted: Wed Feb 27, 2013 9:28 pm
by Letkey
thats not me in my car just saying
90k Miles, 3 door, Black, 1.4cl SUPER CLEAN!!
Picked up my car a week ago, took it into work to see if there was any major with it, all in all its a soild car! needs a few things done to it, the main thing is it needs a whole new distributer, but i can get my hands on a whole new genuine distributer + the Rotar arm & distributer cap for 80 quid so thats all good, also needs rear bumpstops and a gear selector seal but while im there im thinking of changing all the ht leads spark plugs, do all the filters and maybe change the sun roof seal while im at it then its time to modify it!
Any ideas for wheels? i was thinking of "Bullet Steel wheels" and maybe 30mm or 40mm lowering springs. Black Halo front lights, all Red Rear lights and maybe tint the windows and stereo and maybe K&N for the MAD power increase aha!
Re: My 1999 6n1 1.4cl Project!
Posted: Wed Feb 27, 2013 9:30 pm
by Letkey
macp wrote:Nice colour that is gonna look good lowered with the right alloys
yeah man i think itll look clean! cant decide weather to lower it 30 or 40mm for the time being then a year down the line just get coil-overs, also not sure whether to keep 13" wheels or go up to 15" and play about with the tyre profile to make it look lower
alexperkins wrote:Welcome
A nice example of a late build model there.
Yeah its soild! took it to work today and had it up on the ramps, i need to change the seal on the gear stick selector as it goes into the casing and i need a new dizzy, but apart from that its wicked
Re: My 6n 1.4cl Project! (First Car)
Posted: Mon Mar 04, 2013 1:47 pm
by alexperkins
Sorted it

You need to get the proper image links though - if you right click the image and copy the image address you should get something than ends in .jpg - these are the links you need