Page 1 of 1
Wheel offset / bore size Fitment ?????
Posted: Tue Mar 05, 2013 12:02 am
by lukey GTI
Anyone know what these rotiform will fit like on the polo. Am clueless with fitment
Sent using tapatalk
Re: Wheel offset / bore size Fitment ?????
Posted: Tue Mar 05, 2013 10:54 am
by dood9n3
ET20 will poke like a mofo
try this calculator
http://www.willtheyfit.com/
- Old New
Diameter 590.9mm 595.8mm
Circumference 1856.4mm 1871.8mm
Poke 39.6mm 81.6mm
Inset 125.6mm 121.6mm
Speedo error 0% -0.82%
Reading at 30mph 30mph 29.75mph
Reading at 60mph 60mph 59.51mph
Ride height gain 0mm 2.45mm
Arch gap loss 0mm 2.45mm
Wheel offset / bore size Fitment ?????
Posted: Tue Mar 05, 2013 1:52 pm
by lukey GTI
Cheers Mate. Would ET 30 be better ?
Sent using tapatalk
Re: Wheel offset / bore size Fitment ?????
Posted: Tue Mar 05, 2013 2:18 pm
by Dennis
ET30 with for instance 195/40 tyres and proper drop would be perfect!
Wheel offset / bore size Fitment ?????
Posted: Tue Mar 05, 2013 11:28 pm
by lukey GTI
You can get them custom made apparently to what size you want bit more expensive like
Sent using tapatalk
Re: Wheel offset / bore size Fitment ?????
Posted: Wed Mar 06, 2013 1:22 pm
by nooge
I own those wheels in ET30 - not fitted yet but my guess was there will only be a tiny bit of poke on the rears..
Re: Wheel offset / bore size Fitment ?????
Posted: Wed Mar 06, 2013 11:18 pm
by lukey GTI
nooge wrote:I own those wheels in ET30 - not fitted yet but my guess was there will only be a tiny bit of poke on the rears..
let me know how it goes lad