Polo 6r wheel advice needed!!
Posted: Tue Jun 25, 2013 2:59 pm
Hi folks my name is Dave, I'm brand new on here and need a little help with some wheel fitments.... Sorry if this question has been asked before, but I've not had the chance to look through previous posts!
So.. I'm the proud owner of a red polo Gti 6r, and am looking to add a nice set of wheels and lower the car for that aggressive look... However, the wheels I want only come in the following size, and I'm not sure if they will fit without causing a major headache!!! The wheels are 3DSM 0.01 (black), come in the correct 5x100 pcd, but are 8.5x18 with an offset of 35... (215/35/18 rubber) I know x18's & 35 offset go on no bother, but will that extra half inch be too much?? Bearing in mind I'm looking to lower the car 35front/45rear.
If anyone can point me in the right direction I'd greatly appreciate it!
So.. I'm the proud owner of a red polo Gti 6r, and am looking to add a nice set of wheels and lower the car for that aggressive look... However, the wheels I want only come in the following size, and I'm not sure if they will fit without causing a major headache!!! The wheels are 3DSM 0.01 (black), come in the correct 5x100 pcd, but are 8.5x18 with an offset of 35... (215/35/18 rubber) I know x18's & 35 offset go on no bother, but will that extra half inch be too much?? Bearing in mind I'm looking to lower the car 35front/45rear.
If anyone can point me in the right direction I'd greatly appreciate it!