Polo 6R/6C Photo Gallery

Chat about your 6R/6C model Polos here!
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: Polo 6R/6C Photo Gallery

Post by iichel »

Likely 288 or 312mm with Audi S1 caps
User avatar
Lee_Liu_Te
New
Posts: 25
Joined: Sat May 16, 2020 9:48 pm
Drives: 6R 1.2 TDI Bluemotion
Location: Poland

Re: Polo 6R/6C Photo Gallery

Post by Lee_Liu_Te »

Na 99% są to zaciski z audi s1 8X0615123A, 8X0615124A. Plus tej blaszki jest taki że jest przykręcana i można ją odkręcić i pomalować jak się chce :wink:
Attachments
1637922673902.jpg
1637922673902.jpg (14.92 KiB) Viewed 29959 times
1635176163548.jpg
1635176163548.jpg (19.63 KiB) Viewed 29959 times
Peter N
Getting There!
Posts: 56
Joined: Sat Feb 24, 2018 8:58 am
Drives: 2017 VW Polo Blue GT 1,4 TSI DSG7
Location: Copenhagen, Denmark
Contact:

Re: Polo 6R/6C Photo Gallery

Post by Peter N »

mosmadsam wrote: Fri Feb 04, 2022 10:24 am
Peter N wrote: Sun Dec 05, 2021 6:03 am The winter look.

Time for a little detailing session today, with a wash and a top up, on paint protection. ✨✨✨
💦💦💦💦
What brakes are you running on the front there Peter, looks like some Audi RS?
Close :-)

Audi S1 brakes and Zimmermann 310 mm sportdiscs
Attachments
83291C7C-E08D-44D0-91BB-BC7C4789DA13.jpeg
83291C7C-E08D-44D0-91BB-BC7C4789DA13.jpeg (3.88 MiB) Viewed 29806 times
6723D20E-96AB-4064-B7F8-9CACF291455D.jpeg
6723D20E-96AB-4064-B7F8-9CACF291455D.jpeg (3.18 MiB) Viewed 29806 times
mannerboy
New
Posts: 10
Joined: Mon Feb 14, 2022 2:07 pm
Drives: polo 6r
Location: TURKEY

Re: Polo 6R/6C Photo Gallery

Post by mannerboy »

good works
mannerboy
New
Posts: 10
Joined: Mon Feb 14, 2022 2:07 pm
Drives: polo 6r
Location: TURKEY

Re: Polo 6R/6C Photo Gallery

Post by mannerboy »

funlovincriminal wrote: Fri May 07, 2021 10:28 am My GTI with 18'' BOLA VST

PXL_20210416_133447490_2.jpg

PXL_20210416_133457352_2 (1).jpg
very nice
stevewb
New
Posts: 3
Joined: Tue Feb 22, 2022 10:21 pm
Drives: polo gti 6c 2017 (67)
Location: wolverhampton

Re: Polo 6R/6C Photo Gallery

Post by stevewb »

wheels done gloss black..
Attachments
2A984479-9A11-4C33-AABD-13FA59DE9D28.png
2A984479-9A11-4C33-AABD-13FA59DE9D28.png (1.48 MiB) Viewed 30078 times
User avatar
mosmadsam
New
Posts: 11
Joined: Tue May 18, 2021 10:42 am
Drives: 6C BlueGT
Location: Basingstoke

Re: Polo 6R/6C Photo Gallery

Post by mosmadsam »

Peter N wrote: Sun Feb 13, 2022 6:53 am
mosmadsam wrote: Fri Feb 04, 2022 10:24 am
Peter N wrote: Sun Dec 05, 2021 6:03 am The winter look.

Time for a little detailing session today, with a wash and a top up, on paint protection. ✨✨✨
💦💦💦💦
What brakes are you running on the front there Peter, looks like some Audi RS?
Close :-)

Audi S1 brakes and Zimmermann 310 mm sportdiscs
Thanks Peter, did you have to make any modifications to fit them or are they a bolt-on upgrade? I believe these are the same brake callipers as a GTI right?
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: Polo 6R/6C Photo Gallery

Post by iichel »

It's a bolt-on upgrade (only change the carriers) if you have the 288mm setup.
amer6R
Platinum Member
Posts: 1104
Joined: Thu Feb 06, 2020 7:57 am
Drives: Polo 6R 2010 1.6 TDI
Location: budget build

Re: Polo 6R/6C Photo Gallery

Post by amer6R »

The time has arrived
Image
Image
Image
I'm going to use light wheel set setup to get the maximum possible. Will run hankook k125 in 195/55 stock. We will see how they grip maybe 205/50 upgrade Toyo TR1.
I dont see the turbo running anywhere near 2.3 bar ( no need for map upgrade (stock is i think 2.5 bar/3 bar) :?: )
Tommorow it should go in, I will have access to 2post lift. Fingers crossed everything goes well.
My goal is 180hp and a sleeper. I have no outside modifications (will probably remove the rear tint).

Next:
288 mm brake upg.+ 2kg of rotational mass
Custom dog bone mount ( I have everything drawn out) -Stiffer, weight 750g.
Short shifter modification nothing crazy.
User avatar
mosmadsam
New
Posts: 11
Joined: Tue May 18, 2021 10:42 am
Drives: 6C BlueGT
Location: Basingstoke

Re: Polo 6R/6C Photo Gallery

Post by mosmadsam »

Here's my Blue GT, I've completed the 6R GTI front end swap including a TRC front splitter. For the lower grill sections, I painted them with black PlastiDip to get rid of the horrible grey finish for a more blended appearance with the bumper! Next up, I've got some Porsche wheels waiting to go on...
IMG_0103.jpg
IMG_0103.jpg (709.64 KiB) Viewed 28540 times
Instagram: @polo_blackgt
2fast4ya
Getting There!
Posts: 59
Joined: Thu Jun 30, 2016 7:29 pm
Drives: polo 1.8 tsi gti bluetec
Location: ashford kent

Re: Polo 6R/6C Photo Gallery

Post by 2fast4ya »

I purchaced a set of aftermarket alloys that look exactly the same as the original wheels the polo came with, i curved the original alloys so needed to refurb them, the only issue was that the hub logo’s were smaller than the original one on the original alloys, i looked online for some hub logo’s & i saw the golf gti hub logo’s which looked smart but they were being sold from dealers for £75 a set so i wernt paying that so i purchaced a set of caddy hub logo’s secondhand in great condition which have the same details as the smaller ones that came with my polo, purchased some red heat resistant spaypaint & some lacquer & made some golf gti center caps, for a fraction of the price , i use the backs of the caps that came with the aftermarket alloys because the caddy ones wouldnt clip in the alloy as the clip bits were shorter so i spliced & grafted them to fit & hold tight in the alloys, then painted & varnished them , they came up a treat & looked well polished against the new alloys , to this day they are still looking good , the pic of my car was before i done the caps , but thats my polo 2016 gti 1.8 192hp tsi bm all waxed & machine polished .😁
A9819316-16C5-4C19-828D-09AECDCD2A0B.jpeg
A9819316-16C5-4C19-828D-09AECDCD2A0B.jpeg (1.3 MiB) Viewed 28815 times
334B81B6-7434-421A-8D15-B947E79CEAA2.jpeg
334B81B6-7434-421A-8D15-B947E79CEAA2.jpeg (1.38 MiB) Viewed 28815 times
6E22EBF7-41BB-438C-9774-8CC02107E97E.jpeg
6E22EBF7-41BB-438C-9774-8CC02107E97E.jpeg (1.37 MiB) Viewed 28815 times
D10D7257-DBE7-45F1-9101-264E282B945F.jpeg
D10D7257-DBE7-45F1-9101-264E282B945F.jpeg (1.02 MiB) Viewed 28815 times
DE011211-70B4-4C15-BEEE-5D35210EDDC3.jpeg
DE011211-70B4-4C15-BEEE-5D35210EDDC3.jpeg (494.39 KiB) Viewed 28815 times
CBFF073E-EC17-45D9-9CB6-1E3DD782A94D.jpeg
CBFF073E-EC17-45D9-9CB6-1E3DD782A94D.jpeg (1002.14 KiB) Viewed 28815 times
F1E4A730-DE3C-447F-933A-FFAB5CA201AF.jpeg
F1E4A730-DE3C-447F-933A-FFAB5CA201AF.jpeg (178.32 KiB) Viewed 28815 times
81E9A07D-6C20-48E6-84B0-BBA1EFFCE5ED.jpeg
81E9A07D-6C20-48E6-84B0-BBA1EFFCE5ED.jpeg (1.93 MiB) Viewed 28815 times
D281A3C3-9BC3-4D71-B330-2BC2F6F33E60.jpeg
D281A3C3-9BC3-4D71-B330-2BC2F6F33E60.jpeg (880.96 KiB) Viewed 28815 times
User avatar
Le_Combattant
Silver Member
Posts: 297
Joined: Sun Mar 07, 2021 4:04 pm
Drives: Polo 6C 1.2 TSI 90 Cup
Location: France

Re: Polo 6R/6C Photo Gallery

Post by Le_Combattant »

My little one <3

Image
amer6R
Platinum Member
Posts: 1104
Joined: Thu Feb 06, 2020 7:57 am
Drives: Polo 6R 2010 1.6 TDI
Location: budget build

Re: Polo 6R/6C Photo Gallery

Post by amer6R »

IMG_20220605_105410.jpg
IMG_20220605_105410.jpg (716.83 KiB) Viewed 27462 times
User avatar
iichel
Bling Bling Diamond Member
Posts: 6361
Joined: Fri Nov 14, 2014 2:14 pm
Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
Location: http://mypassat.nl/

Re: Polo 6R/6C Photo Gallery

Post by iichel »

Darkside TDI turbo damper delete?
amer6R
Platinum Member
Posts: 1104
Joined: Thu Feb 06, 2020 7:57 am
Drives: Polo 6R 2010 1.6 TDI
Location: budget build

Re: Polo 6R/6C Photo Gallery

Post by amer6R »

iichel wrote: Wed Jun 15, 2022 12:17 pm Darkside TDI turbo damper delete?
No, I made it. It can use factory hose lenght.
As I know darkside damper doesnt have this much clearance in all directions
Post Reply