Page 1 of 1
Engine conversion - HELP!
Posted: Wed Jun 16, 2004 5:38 pm
by Mk4_Scotland
okay here's the deal - i have a 1.4 8v mk4, i want to put in a 1.4 16v engine out of a mk4 what would i need to get this done (DIY
) except the obviously the eng and box! please someone help! Thanks!
Posted: Wed Jun 16, 2004 5:59 pm
by 4paws
all you need apart from them
is the wiring loom and ecu
Posted: Wed Jun 16, 2004 6:04 pm
by 4paws
think i saw you at georges square on sat night?
staggered past your car when u was sitting at the lights
Posted: Wed Jun 16, 2004 7:02 pm
by mk4ads
engine (has to be same style as your car i.e. early/late style clocks)
gearbox
brake setup (advised but not essential)
engine loom (interior loom is also advised but not essential)
fuel pump (16v obviously needs more fuel so pump needs to be bigger
)
16v clocks (not essential as the only difference is the 16v goes up another 10 or 20mph on the speedo and the red line starts a bit later)
If ya need any info gimme a shout on msn
[email protected]!
Posted: Wed Jun 16, 2004 7:19 pm
by chubbster
R4bby has just completed a conversion doing a 6n 16v into a s3 firebreather, he says all the engine, gearbox etc is goin up on ebay. PM him
Posted: Thu Jun 17, 2004 7:42 pm
by Mk4_Scotland
yeh would have been me in the town, saw you about ek a few times too,
cool, converion might be on its way!