Advice needed 9n front speakers
Posted: Fri Sep 13, 2013 11:41 am
Looking at buying components and an amp ,£200 region .I,m thinking of this for the wiring ,speaker cables from amp to crossover mounted under dash ,low freq output to original speaker wires for door ,then hi freq output to new tweeter using new wiring fed up behind dashboard .
Or would the new tweeters be ok on standard wiring and not using the new crossovers eg signal from amp to orig wiring at back of HU ,then let the orig wiring separate the signals for door and tweeters .
Advice and suggestions welcome .
Or would the new tweeters be ok on standard wiring and not using the new crossovers eg signal from amp to orig wiring at back of HU ,then let the orig wiring separate the signals for door and tweeters .
Advice and suggestions welcome .