Page 1 of 1
Trip computer
Posted: Mon Mar 31, 2014 8:42 pm
by Roundsquare
Is there anyway I can find out if our 12 plate Polo has the ability to have the stalk with the function button added and therefore give us the info on the DIS?
Do all 6r Polos have this built in but just don't have the stalk to actually access it?
I have a vag.com lead as no doubt it would need coded as well if it can be done.
Re: Trip computer
Posted: Thu Apr 03, 2014 12:45 pm
by Eddie-gt
If your cluster has a 6 in the 2nd from last then you would need to add the stalk and 3x wires and code it
960, 961, 962
I have a 6R stalk for sale
Re: Trip computer
Posted: Sat Apr 05, 2014 1:40 pm
by Roundsquare
Eddie-gt wrote:If your cluster has a 6 in the 2nd from last then you would need to add the stalk and 3x wires and code it
960, 961, 962
I have a 6R stalk for sale
Cheers Eddie. Yes I could be interested in this depending on how easy it is to do.
Where's the best place to look for the cluster number?
Cheers
Re: Trip computer
Posted: Tue Apr 08, 2014 4:00 pm
by Eddie-gt
you will need to use VCDS to look at the part number or take it out
you will need to take the steering wheel off to change stalks
Posted: Tue Apr 08, 2014 4:02 pm
by Roundsquare
Ill have a look on vcds. Do you know roughly where I look?
Sent from my GT-I9305 using Tapatalk
Re: Trip computer
Posted: Tue Apr 08, 2014 6:32 pm
by Eddie-gt
address 17 will give the part number
Posted: Tue Apr 15, 2014 6:35 pm
by Roundsquare
Ed I replied in the classified section.
Sent from my GT-I9305 using Tapatalk