Probably the Worlds greatest Polo resource
https://www.uk-polos.net/
well its only one cable for the air bag isnt it so bit confusedSimon90 wrote:Everything connect back up okay?
All plugs plugged in,
When my last polo was off the road i changed to a momo then swopped back but didnt have any issues that i remember maybe give it 50miles or disconnect the battery for 30mins?
If all fails vag com it haha
I have Vagcom,h100vw wrote:VCDS is for clearing fault codes. Which if everything is connected properly and serviceable, will turn off the warning lights.
Unless you have VCDS handy, always disconnect the battery before doing airbag jobs as the controller sees everything otherwise.
Gavin
Would yu know exactly what I need to do?h100vw wrote:You log in to the airbag controller and check the faults and then clear faults. It strikes me that you need to do some poking about with VCDS, to learn it's capabilities.
There's an interactive thing on the website to show you what to do.
Gavin
All sortedh100vw wrote:Yeah, it's dead easy but I live in Australia and as a "newbie" all my posts get vetted by mods first, so it's painful sending replies.
Honestly, you have an internet connection, which means you have google. Don't rely on asking questions on forums for answers mate.
There would be millions of times this has been asked before. If you don't have a real VCDS cable, do yourself a massive favour and get one or someone that does have one.
Gavin
