Bi xenon adapterset kufatec need help please!
Posted: Sat May 10, 2014 5:22 pm
Hello everyone,
first sorry for my english and dont have german.
hope u can help me please?
I'm working on retrofit OEM bi xenon for my polo 6r.
all cable sets are kufatec purchased but alone as usual it was unclear where the cables should be inserted into the bmc.
It is on the ropes by descent from the xenon adapters (all gray) but with color stickers abbreviations.
GN = green
VI = violet
WS = white
BL = blue
http://tapatalk.com/tapatalk_mobile_ima ... Ny5qcGc%3D
These must therefore be connected to the BCM as follows:
A plug - pin 5
plug b - pin 3
plug b - pin 5/6 pin
plug b - pin 9/10 pin
maybe there is somewhere a pinout of the BCM is available where, for example:
pin 5 is color violet
pin 3 is white
etc. ....
etc. ....
like to hear back!
first sorry for my english and dont have german.
hope u can help me please?
I'm working on retrofit OEM bi xenon for my polo 6r.
all cable sets are kufatec purchased but alone as usual it was unclear where the cables should be inserted into the bmc.
It is on the ropes by descent from the xenon adapters (all gray) but with color stickers abbreviations.
GN = green
VI = violet
WS = white
BL = blue
http://tapatalk.com/tapatalk_mobile_ima ... Ny5qcGc%3D
These must therefore be connected to the BCM as follows:
A plug - pin 5
plug b - pin 3
plug b - pin 5/6 pin
plug b - pin 9/10 pin
maybe there is somewhere a pinout of the BCM is available where, for example:
pin 5 is color violet
pin 3 is white
etc. ....
etc. ....
like to hear back!
