New wheel problem on 6n2

Discuss Suspension, Brakes, Wheels and Tyres
Post Reply
globalomega
New
Posts: 26
Joined: Thu Oct 25, 2012 12:03 am
Location: Dublin, Ireland

New wheel problem on 6n2

Post by globalomega »

So I decided to put new wheels on my polo. Bought 14 inch, 6.5j et 30 alloys. And now when I drive I hear this clicking noise and steering wheel stutters/shakes more. Feels wierd on turning.

Is this matter of wheel balance or is it more serious?
User avatar
alexperkins
Site Admin
Posts: 14866
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
Location: Poole, Dorset, UK.
Contact:

Re: New wheel problem on 6n2

Post by alexperkins »

Are the wheels brand new?

First, jack it up and make sure that the wheel spins freely without noise

Second, check your tyre pressures (30 all round)
globalomega
New
Posts: 26
Joined: Thu Oct 25, 2012 12:03 am
Location: Dublin, Ireland

Re: New wheel problem on 6n2

Post by globalomega »

So turns out my front wheel bolts are coming loose ( All of them ) Just after two day driving. I tightened them again now while wheels are cold.
User avatar
alexperkins
Site Admin
Posts: 14866
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
Location: Poole, Dorset, UK.
Contact:

Re: New wheel problem on 6n2

Post by alexperkins »

Have you used a torque wrench?
globalomega
New
Posts: 26
Joined: Thu Oct 25, 2012 12:03 am
Location: Dublin, Ireland

Re: New wheel problem on 6n2

Post by globalomega »

Just Regular wheel wrench that lays in my boot with spare.
User avatar
alexperkins
Site Admin
Posts: 14866
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
Location: Poole, Dorset, UK.
Contact:

Re: New wheel problem on 6n2

Post by alexperkins »

I would suggest getting them tightened properly at a garage to ensure they dont come undone again

Its a little concerning all the bolts were loose :shock: Could've had a major accident
globalomega
New
Posts: 26
Joined: Thu Oct 25, 2012 12:03 am
Location: Dublin, Ireland

Re: New wheel problem on 6n2

Post by globalomega »

Yea a bit scary. Anyhow I am going to garage on saturday to get my wheel alignment/balance done. Will get the bolts checked aswell then.
Post Reply