Page 1 of 1

Adding Auto Lights - any have a walk through please ?

Posted: Fri Nov 14, 2014 8:22 am
by Norbreck21a
OK, after being nagged to death by the wife that my Golf GTD has auto headlights and her Blue GT doesn't, I understand from the likes of Ciclo and others that it can be added to the Polo 6R.

Does anyone have a bit of a walk though as to what's involved and if it's really complicated or just difficult. I've heard stories that access to BCM module under the dash is a right b*tch to access etc.

For information the spec of the wife's car is as follows:

2013 Polo Blue GT - DSG (6R). Complete with factory fit Xenon headlights with static cornering light function and LED daytime running lights. I've since fitted original fitment front Fog Lamps so her current light switch has positions for Off, Side Lights, Head Lights as well as Front Fogs (first pull) and Front and rear Fogs (second pull).

I think Ciclo was offering the "kit" for around €110 (earlier this year), but unfortunately unforeseen bills meant I couldn't take him up on this as I had planned. I am now sorted financially and am looking ot possibly install this on wife's car over the Christmas to new year break (as we are both off).

Any advice, very much appreciated.

Images below:

Image

Image

Image

Re: Adding Auto Lights - any have a walk through please ?

Posted: Fri Nov 14, 2014 9:54 am
by peter_dk25

Re: Adding Auto Lights - any have a walk through please ?

Posted: Fri Nov 14, 2014 4:16 pm
by Norbreck21a
Thanks for that Peter.

Don't know what I was worrying about, looks a piece of pi55 - NOT :lol:

Wow, a lot of wiring mods here. I think I need to digest this and see if it's within my capabilities to do.

Re: Adding Auto Lights - any have a walk through please ?

Posted: Sat Nov 15, 2014 7:12 am
by peter_dk25
I did it my self on my Blue GT:
http://www.uk-polos.net/view ... 11&t=61509
Not so difficult – just a little tricky concerning the BCM part of it…