Parts list for auto anti-dazzel RV Mirrror & Rain sensor
Posted: Mon Jul 12, 2004 6:14 pm
Another mod I am looking into for my Polo 9N is the anti-dazzel rear view mirror with rain sensor. The part numbers I have from ETKA 6 - 436(old) are:
I have asked VAG-parts to quote on the cost and if it is in a resonable price range I will go ahead with the order. I will get back to you when it is done.
6Q1 857 511 A Y20.
3B0 858 547 A Y20 (LEFT CAP)
3B0 858 548 A Y20 (RIGHT CAP)
6Q0 857 591 Y20 (WIRE CONDUIT, LOWER PART)
6Q0 857 594 Y20 (CABLE CHANNEL, UPPER PART)
I beleive I have selected pearl grey and RHD
and for the wiring loom parts:
# 6 6N0 971 843 E
(BRACKET ADAPTER WIRE HARNESS WITH RAIN SENSOR)
# 5 6Q0 971 615 R
(WIRING CONDUIT ADAPTER WIRING HARNESS WITH RAIN SENSOR)
# 4 4D0 972 643
(ROUND CONNECTOR HOUSING WITH CONTACT LOCK RAIN SENSOR)
# 3 4B0 971 834
( FLAT CONTACT HOUSING COUPLE PIECE WIRING HARNESS DOE INTERIOR) (6-PIN))
# 2 4B0 971 833
(FLAT CONTACT HOUSING INTERIOR AND READING LIGHT)
# 1 (I think this includes all of the above) 6Q0 971 411 (WIRING HARNESS ADAPTER RAIN SENSOR FOR VEHICLES WITH AUTOMATIC ANTI-DAZZLE INTERIOR REAR VIEW MIRROR)
From the erWin manual it looks as though this connects into the reading and interior light circuit.
It looks as though this mod will require an accident with the front window to get a replacment one with the rain sensor in. Even if you don't want to do this the glass is listed @ £140 but VAG-Parts are a lot cheaper than the RRP. Part # 6Q0 845 011 E (with tint and with view for VIN)
Anybody done this or got it and can confirm that there is a difference in the winscreen. i.e. part of the sensor is in the windscreen.
I assume the system overrides the wiper switch as there is no switch listed with specifics to this mod.
Have fun and don't blam me if it goes wrong.
I have asked VAG-parts to quote on the cost and if it is in a resonable price range I will go ahead with the order. I will get back to you when it is done.
6Q1 857 511 A Y20.
3B0 858 547 A Y20 (LEFT CAP)
3B0 858 548 A Y20 (RIGHT CAP)
6Q0 857 591 Y20 (WIRE CONDUIT, LOWER PART)
6Q0 857 594 Y20 (CABLE CHANNEL, UPPER PART)
I beleive I have selected pearl grey and RHD
and for the wiring loom parts:
# 6 6N0 971 843 E
(BRACKET ADAPTER WIRE HARNESS WITH RAIN SENSOR)
# 5 6Q0 971 615 R
(WIRING CONDUIT ADAPTER WIRING HARNESS WITH RAIN SENSOR)
# 4 4D0 972 643
(ROUND CONNECTOR HOUSING WITH CONTACT LOCK RAIN SENSOR)
# 3 4B0 971 834
( FLAT CONTACT HOUSING COUPLE PIECE WIRING HARNESS DOE INTERIOR) (6-PIN))
# 2 4B0 971 833
(FLAT CONTACT HOUSING INTERIOR AND READING LIGHT)
# 1 (I think this includes all of the above) 6Q0 971 411 (WIRING HARNESS ADAPTER RAIN SENSOR FOR VEHICLES WITH AUTOMATIC ANTI-DAZZLE INTERIOR REAR VIEW MIRROR)
From the erWin manual it looks as though this connects into the reading and interior light circuit.
It looks as though this mod will require an accident with the front window to get a replacment one with the rain sensor in. Even if you don't want to do this the glass is listed @ £140 but VAG-Parts are a lot cheaper than the RRP. Part # 6Q0 845 011 E (with tint and with view for VIN)
Anybody done this or got it and can confirm that there is a difference in the winscreen. i.e. part of the sensor is in the windscreen.
I assume the system overrides the wiper switch as there is no switch listed with specifics to this mod.
Have fun and don't blam me if it goes wrong.