Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
iichel wrote: ↑Thu Dec 22, 2022 8:14 am
Thanks. I will reply by private message with your new eeprom to try.
Thank you very much. I am already despairing.
Hi, I had a look at your EEPROM but I'm afraid I'm not able to find anything wrong with it. I compared all the reference values that VDO offer with a stock 6R0 eeprom, and it seems well adjusted.
Hi , maybe I can help. I did something similar recently.
Vdo editor does not have many options like brake fluid warning, abs type or boot indicator.
I need eeprom backup from the old and new clusters to fix it.
Hi, I had a look at your EEPROM but I'm afraid I'm not able to find anything wrong with it. I compared all the reference values that VDO offer with a stock 6R0 eeprom, and it seems well adjusted.
Hi , maybe I can help. I did something similar recently.
Vdo editor does not have many options like brake fluid warning, abs type or boot indicator.
I need eeprom backup from the old and new clusters to fix it.
MrCollayder wrote: ↑Sun Jan 15, 2023 7:35 pm
So, I've finally done some tests with 2q0 BSD radars =)
Now I have only 2 errors in 3C: no warning lamps))
Parking exit assistant is now active, but BSD isn't yet because of these errors.
Long coding is 52 95 24 A0.
This coding is for PQ.
• BSD/SWA is ON
• WITHOUT ecu for draw bar
• left-hand drive
• BSD/SWA warning lamps via PWM
• WITHOUT pre-crash_rear
• RTCA is ON
• parksystem installed
• NO break intervetion
• WITHOUT lane assist
Next week I'll try to connect both lamps and activate RTA.
Cool, thanks for helping out. Really appreciated. What dataset are you using?
Hi, I had a look at your EEPROM but I'm afraid I'm not able to find anything wrong with it. I compared all the reference values that VDO offer with a stock 6R0 eeprom, and it seems well adjusted.
Hi , maybe I can help. I did something similar recently.
Vdo editor does not have many options like brake fluid warning, abs type or boot indicator.
I need eeprom backup from the old and new clusters to fix it.
MrCollayder wrote: ↑Sun Jan 15, 2023 7:35 pm
So, I've finally done some tests with 2q0 BSD radars =)
Now I have only 2 errors in 3C: no warning lamps))
Parking exit assistant is now active, but BSD isn't yet because of these errors.
Long coding is 52 95 24 A0.
This coding is for PQ.
• BSD/SWA is ON
• WITHOUT ecu for draw bar
• left-hand drive
• BSD/SWA warning lamps via PWM
• WITHOUT pre-crash_rear
• RTCA is ON
• parksystem installed
• NO break intervetion
• WITHOUT lane assist
Next week I'll try to connect both lamps and activate RTA.
Cool, thanks for helping out. Really appreciated. What dataset are you using?
Today I've connected the lamps. So, there aren't any errors in 3C =)
Dataset's from passat_usa: 003C_2Q0907686B_0150_1VWMA7A31MC000090_USA
MrCollayder wrote: ↑Sun Jan 15, 2023 7:35 pm
So, I've finally done some tests with 2q0 BSD radars =)
Now I have only 2 errors in 3C: no warning lamps))
Parking exit assistant is now active, but BSD isn't yet because of these errors.
Long coding is 52 95 24 A0.
This coding is for PQ.
• BSD/SWA is ON
• WITHOUT ecu for draw bar
• left-hand drive
• BSD/SWA warning lamps via PWM
• WITHOUT pre-crash_rear
• RTCA is ON
• parksystem installed
• NO break intervetion
• WITHOUT lane assist
Next week I'll try to connect both lamps and activate RTA.
Cool, thanks for helping out. Really appreciated. What dataset are you using?
Today I've connected the lamps. So, there aren't any errors in 3C =)
Dataset's from passat_usa: 003C_2Q0907686B_0150_1VWMA7A31MC000090_USA
Hi, I had a look at your EEPROM but I'm afraid I'm not able to find anything wrong with it. I compared all the reference values that VDO offer with a stock 6R0 eeprom, and it seems well adjusted.
Hi , maybe I can help. I did something similar recently.
Vdo editor does not have many options like brake fluid warning, abs type or boot indicator.
I need eeprom backup from the old and new clusters to fix it.
Hi till3tsio,
Thank you for your messages and your work. Unfortunately I can't answer the messages because I'm still too new to the forum. Unfortunately, I always have to send in the speedometer to upload the EEPROM file.
The part number of my Polo speedometer is 6R0920861H. Thank you for your help.