Retrofitting OEM Xenon on a POLO 6R BlueMotion.
Posted: Sun Mar 15, 2015 8:40 am
This topic is solely and exclusively for Polo 6R BlueMotion with BCM 6R0 937 088, 6R0 937 088 B, 6R0 937 088 D, 6R0 937 088 F or highest 7H0 937 090...
Non bluemotion.
BCM Max
Without leveling and cleaning systems, but I want to remember that these two systems are mandatory.
What do you need?
- Original xenon headlights.
- Adapter harness with connectors 10-pin to 14-pin.
- VCDS
Is it necessary to add diodes o capacitors to the adapter harness?
No. With BCM of BlueMotion is not necessary to add diodes or capacitors.
Is it possible to run all the lights as from factory?
Yes. Including Authentic daytime running lights and static cornering lights.
Authentic DRLs: with light switch "0" only works xenon LEDs, no rear parking lights.
Installation
Removing headlight H4
http://workshop-manuals.com/volkswagen/ ... headlight/
Removing headlight H7
http://workshop-manuals.com/volkswagen/ ... headlight/
Installing headlight with gas discharge bulbs
http://workshop-manuals.com/volkswagen/ ... headlight/
Adjusting headlight
- I recommend to make the adjustment in a workshop that have headlights testing unit.

1 - Height adjustment
2 - Lateral adjustment
– Turn height adjustment screw -1- until setting is correct.
Note
In some markets, the adjustment bolt for lateral adjustment is -2- encapsulated. Lateral adjustment is not permissible here.
– Turn lateral adjustment screw -2- until setting is correct.
Electric installation to make everything work properly
... coming soon
VCDS
After that: http://www.uk-polos.net/view ... 19#p492319
Encode the following bytes.
Address 09: Cent. Elect. (J519)
Byte11 91 HEX. Binary: 10010001
Byte16 5A HEX. Binary: 01011010
Byte18 67 HEX. Binary: 01100111
Byte19 2F HEX. Binary: 00101111
Byte21 05 HEX. Binary: 00000101
Links recommended by other users to buy the parts
...
Non bluemotion.
Without leveling and cleaning systems, but I want to remember that these two systems are mandatory.
What do you need?
- Original xenon headlights.
- Adapter harness with connectors 10-pin to 14-pin.
- VCDS
Is it necessary to add diodes o capacitors to the adapter harness?
No. With BCM of BlueMotion is not necessary to add diodes or capacitors.
Is it possible to run all the lights as from factory?
Yes. Including Authentic daytime running lights and static cornering lights.
Authentic DRLs: with light switch "0" only works xenon LEDs, no rear parking lights.
Installation
Removing headlight H4
http://workshop-manuals.com/volkswagen/ ... headlight/
Removing headlight H7
http://workshop-manuals.com/volkswagen/ ... headlight/
Installing headlight with gas discharge bulbs
http://workshop-manuals.com/volkswagen/ ... headlight/
Adjusting headlight
- I recommend to make the adjustment in a workshop that have headlights testing unit.

1 - Height adjustment
2 - Lateral adjustment
– Turn height adjustment screw -1- until setting is correct.
Note
In some markets, the adjustment bolt for lateral adjustment is -2- encapsulated. Lateral adjustment is not permissible here.
– Turn lateral adjustment screw -2- until setting is correct.
Electric installation to make everything work properly
... coming soon
VCDS
After that: http://www.uk-polos.net/view ... 19#p492319
Encode the following bytes.
Address 09: Cent. Elect. (J519)
Byte11 91 HEX. Binary: 10010001
Byte16 5A HEX. Binary: 01011010
Byte18 67 HEX. Binary: 01100111
Byte19 2F HEX. Binary: 00101111
Byte21 05 HEX. Binary: 00000101
Links recommended by other users to buy the parts
...


I repeated like a parrot, sorry ...