UK-POLOS.NET - THE VW Polo Forum

Hi all,

I'm planning on retro-fitting the auto dimming the mirror on a 'normal' windshield. A foto report will follow this weekend.

I bought this one:
http://www.aliexpress.com/item/OEM-Orig ... 82272.html

The guide I'll be using is ciclo's guide for the wire fitting.

One question:
The set comes without connectors to the BCM.
The wiring is not so difficult, T6/3 to T73b/48 (manual transmission reverse signal) and T3/3 to T73b/24 (LIN bus), both BCM white.

Does anyone know what connectors to use for this?

Thanks!

click

MQS - Micro Quadlok System - 0,63mm
000 979 009 E

http://www.a4-freunde.com/showwiki.php? ... zu+gehoert

If I'm not mistaken I sent you one or two of those.

Awesome, thanks man. I'll report back with a nice foto report of the result (or failure)

excelente me lo apunto saludo

gracias

Estaría bien hacer un brico del montaje, ya lo isiste iichel?

es-polos.net

So, the result!



Dimming mirror works
Light sensor still has to be connected to the BCM

More detailed report tomorrow
I'm sorry Danilugomk5, no hablo Espanol bien.

Now it's girlfriend time...

iichel, how hard was it to take off the stock mirror clamp which was glued to the windshield? What chemical/solution did you use to take it off the windshield?

Excellent iichel! Good job, look forward to see that report.
THE Rosa-line increased its value and driving safety. Coming soon will do it in comfort...

Mart!n-GTI-DK wrote:es-polos.net

You're absolutely right. Hopefully this will not happen again..., never again.

Please find the report here

http://www.uk-polos.net/view ... 95#p492795

I haven't made photos of wiring process, sorry. I think the most important part is the sensor retrofit

You'll really want to move to P1200 wet and then P2000 wet ultimately, then use a glass polish to smooth the edges and give a good clear finish if you want to be able to use the rain sensor

iichel wrote:So, the result!



Dimming mirror works
Light sensor still has to be connected to the BCM

More detailed report tomorrow
I'm sorry Danilugomk5, no hablo Espanol bien.

Now it's girlfriend time...

iichel thank you eventhough you wrote in Spanish sorry for doing what I did not realize, I stay perfect.

alexperkins wrote:You'll really want to move to P1200 wet and then P2000 wet ultimately, then use a glass polish to smooth the edges and give a good clear finish if you want to be able to use the rain sensor

I tried it with a bottle of water and it was responding to the water. Pretty much like OEM
No but you might have a point. I'll order some P1200 and P2000 and see if I can get it a bit better and report results.

Nice Its all about the finish haha

Brasso is good for smoothing out the scratches once they are fine enough