Page 1 of 1
Advice needed
Posted: Tue Sep 22, 2015 7:26 pm
by Mayhem
Right ordered my lowering springs and plan on fitting at weekend. Any good tips on fitting them, heard the fronts are a little tricky? Is it just case of removing scuttle panel 3 bolts at top and couple at the bottom and pulling the strut out?
Re: Advice needed
Posted: Tue Sep 22, 2015 7:37 pm
by Ricmondo
No...look carefully at the workshop manual and ask an expert. Compressed springs can be very dangerous!
Re: Advice needed
Posted: Tue Sep 22, 2015 7:38 pm
by Mayhem
I've lowered cars before just heard the polo is a little tricky at the front
Re: Advice needed
Posted: Tue Sep 22, 2015 9:23 pm
by Ricmondo
There are a number of very useful videos on You Tube which will give you invaluable guidance. Good luck!