My 6n polo project
Posted: Sat Nov 14, 2015 8:40 pm
End of summer 2015
Thought I'd start this to keep progress on my polo from where it started to its transformation over winter and further on.
Here is the polo as it sits at the moment completely standard.
From this point I have bought 16v front bumper brand new from my work.
I then bought a 16v rear bumper and all the grills for the front and sent them all of for spraying and smoothing after a quick test fit now I had them sent off I bought some 6n2 gti seats and some coilovers, I got a mate to do a Photoshop of my plans which were simple .
From this I moved forward and bought a double din head unit which I knew would not fit to make fit, I moved the heater controls down . I then cut the bar in between vents and controls, this was a test fit without a fascia or sand down.
I also bought a sound system including, 2 8 inch sub's at 1200 watts, 2 6 inch door speakers and two tweeters plus two mini amps to amplify the power for all these. I also bought a 1200 watt 12 inch sub .
I had my interior stripped ready to wire and fit the new seats
I then got a little bored of my static idea and the interior haha, I found a guy selling a car on hydraulics and with a full leather merc interior including dash, so the idea has changed and the car is going into a garage for this over winter expect more updates.
The bumpers have been painted but me and my boss have decided a colour change is in place and the car shall be wrapped undecided on colour as of yet. But my boss has experience in car build sso is a lot of help.
Keep an eye out for this build expect many updates to come [FACE THROWING A KISS]
23/11/15
Now my colour is decided I have a rough id ea on what it will look like, but have decided a different set of wheel, badge on other little bits and pieces. Other than that found my keys and my bumpers have arrived from the body shop
Sent from my XT1032 using Tapatalk
Thought I'd start this to keep progress on my polo from where it started to its transformation over winter and further on.
Here is the polo as it sits at the moment completely standard.
From this point I have bought 16v front bumper brand new from my work.
I then bought a 16v rear bumper and all the grills for the front and sent them all of for spraying and smoothing after a quick test fit now I had them sent off I bought some 6n2 gti seats and some coilovers, I got a mate to do a Photoshop of my plans which were simple .
From this I moved forward and bought a double din head unit which I knew would not fit to make fit, I moved the heater controls down . I then cut the bar in between vents and controls, this was a test fit without a fascia or sand down.
I also bought a sound system including, 2 8 inch sub's at 1200 watts, 2 6 inch door speakers and two tweeters plus two mini amps to amplify the power for all these. I also bought a 1200 watt 12 inch sub .
I had my interior stripped ready to wire and fit the new seats
I then got a little bored of my static idea and the interior haha, I found a guy selling a car on hydraulics and with a full leather merc interior including dash, so the idea has changed and the car is going into a garage for this over winter expect more updates.
The bumpers have been painted but me and my boss have decided a colour change is in place and the car shall be wrapped undecided on colour as of yet. But my boss has experience in car build sso is a lot of help.
Keep an eye out for this build expect many updates to come [FACE THROWING A KISS]
23/11/15
Now my colour is decided I have a rough id ea on what it will look like, but have decided a different set of wheel, badge on other little bits and pieces. Other than that found my keys and my bumpers have arrived from the body shop
Sent from my XT1032 using Tapatalk