Page 1 of 1

Parking Sensors "No Sensor View" error message

Posted: Mon Nov 30, 2015 8:50 pm
by tomtoon2015
Hi all,
On my BGT earlier, I had the error message pop up "ACC and Front Sensors: No Sensor View"

I could tell there was an issue, as it wasn't giving me the too close symbol and sensors were only working if I manually pressed the button. After around 15-20 minutes they started to work normally.

Anyone else had this issue or what could be the cause of it?

Re: Parking Sensors "No Sensor View" error message

Posted: Tue Dec 01, 2015 6:07 pm
by Ricmondo
I've had that problem a number of times, it also disables the reversing camera. It is obviously a software issue but I have noticed it only happens some time after I have manually deselected the park pilot. Perplexing when first encountered I've found that pressing in the media power button for ten seconds, a way to provoke a hard reboot gives the little elves behind the screen a chance to get back into line and restore normal service.

Re: Parking Sensors "No Sensor View" error message

Posted: Tue Dec 01, 2015 7:57 pm
by tomtoon2015
Strange, just in my case it fixed itself.