Page 1 of 1

Sold

Posted: Wed Feb 10, 2016 8:18 am
by 1der
Selling due to work reasons


Engine spec:


Bam 20vt engine approx 100k

Custom Full 3" stainless steel exhaust from the turbo back with a decat. Hidden tailpipe.

Badger 5 3" TIP with Jetex cone filter

Forge 007p

Toyosports intercooler with custom pipework

Remapped by R-tech to 270bhp / 277 ft/lb torque

5 speed diesel gearbox


Chassis:


Bilstein Coilovers

Front brakes - Hi-spec 4 pot calipers with 280mm discs and ferodo DS2500 pads. Both have a lot of life left

Rear brakes - standard discs with EBC greenstuff pads

15" Rota Grid V in Bronze, with Yokohama S drives fitted all round. Will need to check the depth, but i think there is a good amount on them.


Interior:


Replica Porsche GT3 seats

Schroth 3 point Harnesses

Half Rollcage, custom made and painted black

6N2 GTI doorcards front and rear. Front doorcards have carbon fibre grab handles

Boot build with false floor

Boost Guage


ICE:


Alpine Type G 12" sub

Alpine Amp - can check the model if required

Alpine Type G front door speakers and tweeters

Alpine flipout Headunit with Ipod connection - can check the model if required


Bodywork:


Worst bit of damage is the crack on the drivers side of the front bumper. The splitter has general stone chips.

I had it resprayed two years ago and at the same time i had the side indicators removed, and the petrol filler cap smoothed. Both front and rear bumpers have been smoothed. Genuine Hella LED rear lights


General:


The Mot is due 3rd of September 2016

The Car was originally a GTI, before TSR performance carried out the conversion. Previous owner was Jamie1.8tpologti

I did have a Varley Redtop battery fitted under the false floor. At the moment a standard battery is fitted, as the Varley did not like sitting over the winter not being used.

The car is registered on the V5 as having the 1.8t fitted.

Price:


I am after £3500 for the car as it is. If i had the bumper fixed i would be asking for more, so feel this price is fair.

Photos

Crack on front Bumper
Image

Image

Image

Image

Image

Image

Re: 6N2 GTI - 1.8T

Posted: Tue Feb 16, 2016 8:03 pm
by jambo91
1der wrote:Selling due to work reasons


Engine spec:


Bam 20vt engine approx 100k

Custom Full 3" stainless steel exhaust from the turbo back with a decat. Hidden tailpipe.

Badger 5 3" TIP with Jetex cone filter

Forge 007p

Toyosports intercooler with custom pipework

Remapped by R-tech to 270bhp / 277 ft/lb torque

5 speed diesel gearbox


Chassis:


Bilstein Coilovers

Front brakes - Hi-spec 4 pot calipers with 280mm discs and ferodo DS2500 pads. Both have a lot of life left

Rear brakes - standard discs with EBC greenstuff pads

15" Rota Grid V in Bronze, with Yokohama S drives fitted all round. Will need to check the depth, but i think there is a good amount on them.


Interior:


Replica Porsche GT3 seats

Schroth 3 point Harnesses

Half Rollcage, custom made and painted black

6N2 GTI doorcards front and rear. Front doorcards have carbon fibre grab handles

Boot build with false floor

Boost Guage


ICE:


Alpine Type G 12" sub

Alpine Amp - can check the model if required

Alpine Type G front door speakers and tweeters

Alpine flipout Headunit with Ipod connection - can check the model if required


Bodywork:


Worst bit of damage is the crack on the drivers side of the front bumper. The splitter has general stone chips.

I had it resprayed two years ago and at the same time i had the side indicators removed, and the petrol filler cap smoothed. Both front and rear bumpers have been smoothed. Genuine Hella LED rear lights


General:


The Mot is due 3rd of September 2016

The Car was originally a GTI, before TSR performance carried out the conversion. Previous owner was Jamie1.8tpologti

I did have a Varley Redtop battery fitted under the false floor. At the moment a standard battery is fitted, as the Varley did not like sitting over the winter not being used.

The car is registered on the V5 as having the 1.8t fitted.

Price:


I am after £3500 for the car as it is. If i had the bumper fixed i would be asking for more, so feel this price is fair.

Photos

Crack on front Bumper
Image

Image

Image

Image

Image

Image

How much for the dump valve?