UK-POLOS.NET - THE VW Polo Forum

Hi everyone. I have a VW POLO 6R 2011 highline version. I don't have washers headlight. Has anyone installed a whole mechanism washer lamp for his Polo?
What parts do I need?

This:
https://www.kufatec.co.uk/shop/en/volks ... vw-polo-6r
+ a new bumber with openings for the nozzles.
And perhaps a new BCM.
That's it

Thx

these are the part numbers, with dutch descriptions.

6R0 955 453 G vergroot reservoir
6R0 955 681 2e pomp koplamp sproeiers
1J0 973 722 A connector pomp
7M0 919 376 sensor was vloeistof
7M0 919 382 O-ring sensor
7M0 973 202 connector sensor
6R0 955 970 B slangen naar sproeier
6R0 955 978 A sproeier links
6R0 955 103 A sproeier rechts

you also need the covers of the washers and a new bumper, that is not included.
it does include the level sensor and connector

somewhere in the topic of, i think, NICOMATI, I also wrote it in english

Great ! Thanks

PS. Which version of the BCM I need?
In the future I plan to also mounting xenon / LED.

I need an electrical schematic how to connect 7M0 919 376 sensor was vloeistof + 7M0 973 202 connector sensor in my Polo 6R

Is there any way you can get hold of 6R0 807 941/2 B/D and use your existing bumper?
They are headlight washer holders.

One wire to the T32/17 of the instrument cluster. The other to the ground.

Thank you iichel

I bought this https://www.kufatec.de/shop/en/volkswag ... vw-polo-6r.


Has anyone bought it and already installed it?