Page 1 of 1

Faulty codes 1,6GTI

Posted: Thu Jul 07, 2016 2:17 pm
by Hesham_mamdouh
Please anyone tell me what is happening ? I feel my motor performance not good , i found this faults on the vag
Image

https://postimg.org/image/j25yr24ip/
Sent from my C6903 using Tapatalk

Re: Faulty codes 1,6GTI

Posted: Thu Jul 07, 2016 3:34 pm
by alexperkins
Upload the image onto imageshack or similar and repost

Or alternatively, put up the text output of the autoscan

Re: Faulty codes 1,6GTI

Posted: Thu Jul 07, 2016 6:43 pm
by Hesham_mamdouh
Done [OK HAND SIGN]

Sent from my C6903 using Tapatalk

Re: Faulty codes 1,6GTI

Posted: Thu Jul 07, 2016 6:46 pm
by alexperkins
Youve got a number of issues there

Possibly broken wires on your lambda sensor
A faulty VVT valve
A damaged EVAP circuit - could be a split pipe

Fuel trim is probably related to the lambda issue

Re: Faulty codes 1,6GTI

Posted: Thu Jul 07, 2016 11:36 pm
by Hesham_mamdouh
What is the VVT valve ? And is there any possibilty that the lamda sensor have an issue from the EVAP fault ?

Sent from my C6903 using Tapatalk

Re: Faulty codes 1,6GTI

Posted: Thu Jul 07, 2016 11:57 pm
by alexperkins
Variable valve timing. It's a solenoid on the left hand side on top of the rocker cover

As for the evap fault, no I would say it's two different issues

Re: Faulty codes 1,6GTI

Posted: Fri Jul 08, 2016 2:13 am
by Hesham_mamdouh
I will ask another question , i feel something strange when i go on a long ride the car become hot i feel the sound of the motor weak you know something strange :D its a wires question i hope you understand me :'D

Sent from my C6903 using Tapatalk

Re: Faulty codes 1,6GTI

Posted: Fri Jul 08, 2016 2:53 pm
by alexperkins
Is the thermostat opening ok? Sounds like it might be overheating

Re: Faulty codes 1,6GTI

Posted: Fri Jul 08, 2016 3:43 pm
by Hesham_mamdouh
The thermostat is canceled because in egypt the weather is hot and also the thermostat here is not in a good quality so i removed it from the water pipe
For the Overheating i dont know the tempreture ampere is always at the middle also the fan is working okay and water cycle is ok ... I dont know whats wrong with the motor , also i changed the green tempreture sensor insidr the motor put nothing change

Sent from my C6903 using Tapatalk