Page 1 of 1
RNS 510 question
Posted: Fri Jul 22, 2016 11:08 pm
by Nlolotte
If i buy RNS 510 will navigation automatically show on my highline mfd or do i need to code it in?
Re: RNS 510 question
Posted: Fri Jul 22, 2016 11:30 pm
by CNK
You need other instrument cluster (BlueGT or WRC or GTI)
Re: RNS 510 question
Posted: Sat Jul 23, 2016 2:03 pm
by Nlolotte
i have the glut gt one already
Re: RNS 510 question
Posted: Sun Jul 24, 2016 7:40 pm
by iichel
Then you'll be fine
Re: RNS 510 question
Posted: Mon Jul 25, 2016 8:36 pm
by Nlolotte
thank you! so plug and play no vcds?
Re: RNS 510 question
Posted: Wed Aug 10, 2016 6:31 am
by habib_123
If you do install the RNS-510 you will need to code it into the car (VCDS). Go into CAN Gateway installation list and tick the box for navigation.
Once done go back out, and into navigation and check coding. I can provide mine if needed.
Good luck!