Engine Light & VWR Intake Kit
Posted: Sun Nov 06, 2016 7:12 pm
Hi All!
New to the forum, I bought the VWR Cold Air Intake System for my POLO GTI 1.4 -2013 and today after a couple of hours driving with the new intake kit the engine light turns on. I read in many forums that this issue may be cause by the new intake is arising poor readings at the Mass Airflow Sensor (MAF). So I want to know if you can help me to correct this issue, I can go with my local automotive mechanic and use his VCDS/VAG-COM to make the changes, but I need to know if this is the correct way or there is another way to do it.
Thanks in advance.
image by balder.ruiz, en Flickr
image by balder.ruiz, en Flickr
New to the forum, I bought the VWR Cold Air Intake System for my POLO GTI 1.4 -2013 and today after a couple of hours driving with the new intake kit the engine light turns on. I read in many forums that this issue may be cause by the new intake is arising poor readings at the Mass Airflow Sensor (MAF). So I want to know if you can help me to correct this issue, I can go with my local automotive mechanic and use his VCDS/VAG-COM to make the changes, but I need to know if this is the correct way or there is another way to do it.
Thanks in advance.
image by balder.ruiz, en Flickrimage by balder.ruiz, en Flickr