Page 1 of 1
EPC warning light
Posted: Thu Mar 02, 2017 8:50 pm
by Vasey
Can anybody help tonight I blew a fuse for the interior lights whilst changing them to led I didn't know which fuse to replace so I pulled out each 1 to see if I could see the blown 1 I managed to change it but now the EPC warning light is on.....any ideas
Sent from my iPhone using Tapatalk
Re: EPC warning light
Posted: Thu Mar 02, 2017 9:08 pm
by ciclo
Push all fuses more strongly into their slot (with a reasonable force
).
Do the ignition process again.
Perhaps the EPC warning light needs to be erased with some diagnostic tool. VCDS for example.
Re: EPC warning light
Posted: Thu Mar 02, 2017 9:11 pm
by Vasey
ciclo wrote:Push all fuses more strongly into their slot (with a reasonable force
).
Do the ignition process again.
Perhaps the EPC warning light needs to be erased with some diagnostic tool. VCDS for example.
Hi ciclo what a nightmare tonight started a job what should of taken half hour max been outside all night it drives ok still pulls could I disconnect the battery then re connector would that work? The car is still under warranty would vw know that I've had the fuses out?
Sent from my iPhone using Tapatalk
Re: EPC warning light
Posted: Thu Mar 02, 2017 10:51 pm
by Vasey
Well disconnected the battery for half an hour lights gone out I've took it up the road seems to be ok
Sent from my iPhone using Tapatalk
Re: EPC warning light
Posted: Fri Mar 03, 2017 8:43 am
by ciclo
Perfect!
