UK-POLOS.NET - THE VW Polo Forum

Hi guys

New to this forum, just got my Polo 6C 2017 and my buddy wanted to code some things in 17 instrument cluster. I think he did it in adaption.

Somehow he made a mistake and now the TPMS light is flashing in the cluster. I have tried to set it in the Car Setup but it doesn't work.

I have a theory that it has been reset somehow so the coding is lost, any help?

FYI he used OBDEleven and I have a backup but you cannot restore a backup in OBDEleven.

Compare backup to current coding and adapt accordingly

iichel wrote:Compare backup to current coding and adapt accordingly

Hi

I already reverted from the backup settings, but that didn't change the error unfortunately.

What is the current error in the abs module?

iichel wrote:What is the current error in the abs module?

Hi

No errors in abs according to scan

Kaalund wrote: Tue Jul 18, 2017 12:59 pm

iichel wrote:What is the current error in the abs module?

Hi

No errors in abs according to scan

You may be able to fix it if you have access to VCDS and the original coding settings.

joe6 wrote:

Kaalund wrote: Tue Jul 18, 2017 12:59 pm

iichel wrote:What is the current error in the abs module?

Hi

No errors in abs according to scan

You may be able to fix it if you have access to VCDS and the original coding settings.

Hi

Is it impossible with OBDEleven?

Should be possible with OBDeleven. VCDS has more features if OBDeleven does not work.